Here's another thread that might be helpful.
Landrader = FZJ80 land cruiser + 18ft Sunrader | Page 3 | IH8MUD Forum
https://forum.ih8mud.com/threads/landrader-fzj80-land-cruiser-18ft-sunrader.935876/page-3
The springs felt soft before I changed the sway bar. I bought the btr46x from whiteline. its only 30mm but after I put it on, the rear felt tight. The springs felt stiffer and I actually felt happy to have a 30mm as 34mm might have been too stiff. My air bags dont touch so they are pretty...
Then the journey began. You can see the boat on the front of the truck, its frame and oars live on the roof along with a stroller/bike mounted baby carrier. Bikes live on the back.
Added a coleman grill to the passenger wheel well so we can grill meat in the great outdoors rather than the tiny indoors. Coleman grills run off 18psi propane and campers run off about 1psi propane so i had to drill out the jets in the grill to make it burn correctly. The grill slides out on...
here are a few pictures of the floor. I didn't cut it out in the dinette area as this would have made for an awkward leg dangle while sitting. The floor was just 3-8 in plywood over a thin layer of styrofoam and clad in aluminum. A jigsaw cut right through it. I then built a few very thin towers...
cut a slot in the the front bumper and cut down a universal winch mount to put in my winch. The whole thing fit inside nicely with the fairlead slightly hidden below the license plate. The last picture is with the bumper back on, you can see how well it came together. You can also see the front...
Sorry it has been a long time since i added to this thread. I added super stiff monomax shocks and then searched long and hard for a 34mm rear sway, had one sent from australia but receiving company went out of business, so it was just sort of lost. The heaviest i could get domestically was a...
Thanks for all the info. Ill look into getting heavier sway bar (thanks for the leads) as that seems like the best solution. Its still got the stock sway bars and they don't seem to do much. I thought about using the leaf springs from the original truck but will save that as a last resort. If I...
I just took it out for its maiden voyage and found that at 70mph it rocks side to side dangerously. The spring rate went from 170lbf/in to 360lbf/in but it still drives like a bobble head doll. At 65 it drives fine as long as im gentle in turns. Off road it was a beast in snow and mud but did...
Decided my little air lift bags werent gonna cut it. Added ome 2868 rear springs that should be able to carry an additional 1200lbs. The back came up 3in with the new springs. The airbags can no longer touch both spring perches. Note the diffrence in wire thickness. Also pulled the ac off the...
Took it to inspection and they werent sure they could test it since its full time 4wd and has huge tires that kept hopping out of the dyno. Also went by a truck scale. Found out it had 2450lbs on the front axle and 3960lbs on the rear axle. Stock should be about 2750lbs on the front and rear...