Recent content by mike91

I did the same exact thing with the adapter. I understand that shaft engagement might be an issue, however because I'm not pushing much power I don't think about it. I'm also not a serious off roader so I can't imagine that it'll be too stressed. And yes I can confirm making the factory shifter...

I thought I was the only one! Sounds like an awesome build, though I am still planning to do a 48re swap at some point and hopefully have no clearance issues. The body lift makes a lot of sense though

The Dakota Digital SGI-100BT and the w terminal on the alternator. Great little unit for all types of swaps.

UPDATE: After doing some more research, a 48RE would be a better transmission for this swap as it is a shorter transmission. A 23 spline output shaft with a 4WD overdrive housing would allow the adapter plate to be used and make the driveline shorter, therefore making the transfer case not hit...

I bought an adapter kit from power brake service, works well, but I imagine you could make an astrovan one work with some new mounting holes. And yes the wilwood master is nice, an upgrade for sure.

I am using a hydroboost set up, and braking is excellent. I also did an ABS/LSPV delete prior to ever driving it with just the hydroboost set up, so I am unsure of how much difference the hydroboost actually made, but overall braking is probably twice as good as before I completed the...

Ah gotcha, it is a regular VE Pump, it just has the Denny T's AFC Delete top on it. It gives me some hp gain, and gets rid of any AFC leaks. I'm not a coal roller at all, and with my current set up I get boost almost immediately so I love it. Not sure if I would have had the same experience with...

I don't understand the question, are you referring to the Turbocharger? I'm not sure what a boost pump is.

Some pictures for those who want to see them, Mostly of exhaust routing.

This thread is an in depth post about what I have done to swap a 6BT Cummins with a 47RH (A618) into a 1996 FZJ80 with the stock transfer case. I am bad at taking pictures during the build process and I apologize in advance. I will answer any questions I can. I also apologize for any typos. Here...