Recent content by mbsheen2

I recently acquired a 2021 Sequoia TRD Pro and was a bit surprised that it doesn't have the hood insulation under the hood to quiet down on engine noise. Doing some digging around I found that some Tundras do have this (part 53341-0C021). I called the dealer and they don't know if these are...

I just recently moved from our 2007 LX470 to a 2021 Sequoia TRD Pro, and so far so good. It's a family vehicle for us and the flexibility of the 3row on the Sequoia is amazing compared to the LX470. I think the Sequoia rides a bit tighter, not as floaty to me as the LX. It is wider, and you...

After bringing it home I believe they painted over the res springs with that plastic-dip stuff because it does come off easily. I do also think that it has a mild lift as well, center of tire to wheel arch is about 22” front and back.

Once I get it I'll be sure to measure from the center of the wheel to the fender well. Hopefully this distance will be easy to confirm with others that have a stock setup.

I'm about to take delivery on this beast in the next few days and while driving back from the dealership I realized something, the front springs on the Fox Shocks were black, not red like I thought all TRD's were. Does anyone have a non-modified TRD Pro Sequoia that could confirm this (are the...

I've had my LX470 for about a year now (its a 2007) and have just recently started listening for this "electric motor" type noise. I can hear it come on right when i start the car and then I hear it once in a while when driving slowly. Having it come on during driving is a normal thing right...

Like many driver's seats the bottom cushion and leather on door side are starting to look fairly worn. Instead of getting new leather I started thinking about whether it might be possible to swap the bottom of the seat from the driver's side to the front passenger side. This way i get more...

I actually found this YouTube video very helpful and watched it several times. I used a 4-lb dead blow hammer (from harbor freight) to get the rotor off the hub (use some penetrating spray and let it sit for a bit). But I also found this post very helpful for some of the torque specs. It...

I recently purchased a 2007 LX470 and just this weekend went through a front brake job. Thanks to this forum the process went very well, even the cone washer part. I decided to try the StopTech Cryo Rotors (non-sloted/drilled) along with the 7000 Green Stuff pads from EBC brakes. Fit of both...