Recent content by lonatic

Just to update the thread I fixed the issue. Ended up being the compressor (wasn’t oem) I purchased a new oem compressor and boom starts working. So word to the wise buy oem compressor.

tensioner replaced and belt, no luck

So just an update on this issue... still current.. at this point i've replaced: 1. Compressor (checked lock sensor as well 800 ohms) (checked ground on top as well seems snug) 2. Fuse Box 3. Condenser I put AC in diagnostics mode and no codes there either.... I feel like i've tried almost...

Nope they just replaced the compressor. I just a condenser. What condenser did you end up going with?

I have not checked coolant temps with OBD2..

Wife was driving around town a couple of weeks ago and the AC stopped working (100degree weather). I opened the hood and had her turn on the AC. The AC clutch was intermittently spinning and making weird noises. I had the mechanic replace the compressor. Fast forward I pick up the vehicle and...

Take out muffler lol it’s a pita

put it all back together, everything is fine. But I also realized why the heat caused the harness to melt, the heat shield is missing ontop of the muffler. Anyone know the OEM part number?

I believe it’s ground. See image by force dampener wb

Update: went to the jy was lucky enough to find a wiring harness. Problem is there are two white w black stripe wires coming from the passenger side. From what I can tell one comes from the rear passenger and the other one continues forward (I haven’t been able to trace). Now when I’m splicing...

This is above the rear right suspension

I had a big exhaust leak causing my rear wiring to melt. I got an abs light along with vsc, brake and another light. Pulled code 33 (rear right speed sensor). Anyone have any idea in what this plug is?

that is gorgeous, keep us updated. Interested to know if he winds up selling it. EDIT: noticed the VA inspection sticker, where you located?

Thats the problem, I havent been able to find anything solid indicating what is out of spec for the rear. Ive looked on the forum at other individuals alignment posts. Some posts show barely any toe in the rear, and then I found some which looked much worse (.50 degrees). Just wanna make sure my...

https://www.tundrasolutions.com/forums/1gen-tundra/141107-camshaft-position-sensor-location-cel-p0340/ See if that will help.