Recent content by KubinB

  1. KubinB

    Build My 80 Series Restoration + LS Swap Project

    Welp after long nights breaking her in and endless work to get her ready. I'm happy to report she took us on the 6 hour drive to MERUS Adventure, wheeled the hell out of her and brought us back home without a hiccup. Quite the shake down for a fresh swap/build. Glad pops was able to be a part of...
  2. KubinB

    Build My 80 Series Restoration + LS Swap Project

    Now that put a smile on my face
  3. KubinB

    Build My 80 Series Restoration + LS Swap Project

    She Lives! Ill upload some videos of exhaust note once I get her properly broken in :-)
  4. KubinB

    Build My 80 Series Restoration + LS Swap Project

    While it was there getting the exhaust, my tech company that I've been building started to really ramp up. I realized my time is better spent on something that makes me money rather than one that takes my money. Seeing as how Butch over at May's metalworks is very familiar with this swap and...
  5. KubinB

    Build My 80 Series Restoration + LS Swap Project

    Hey everyone, its been awhile. Here's a little update: I made a shift cable bracket to hold the outer sheath of the cable for transmission shifter. It came out good, but I should have moved it more to the left to align with the shifter arm before drilling the holes in the floor for it. Woops...
  6. KubinB

    Build My 80 Series Restoration + LS Swap Project

    Thank you for your contribution!
  7. KubinB

    Build My 80 Series Restoration + LS Swap Project

    Another update: Got the Radiator from Mosley, its pretty nice goes right in. The only issue I had was the original rubber isolators on the car must be compressed a lot the bottom hose outlet on the radiator is very close to the frame rail, so ordered new rubbers. finished plumbing all of the AC...
  8. KubinB

    Build My 80 Series Restoration + LS Swap Project

    Little update: I've been doing odds and ends getting everything installed and adapted Ignition, throttle cable, fuel injectors all on What I did to make the stock pedal work was hand file the original spot where the cable attached to fit the Lokar universal fitting. it actually worked out...
  9. KubinB

    Build My 80 Series Restoration + LS Swap Project

    Well, I didn't quite get her done in time for Jambo 2026... Have been super busy between writing and recording my band's new album, and all the side work for my tech company, so I took the 4runner instead. Still had a blast! I think my buddy got the most air in the stampede That did however...
  10. KubinB

    Build My 80 Series Restoration + LS Swap Project

    Well I made it back from Vacation, St. Martin is absolutely beautiful, the SXM Festival is also lots of fun! But now that I am back, I'm hard at work on this project. Some updates: I made this ridiculous adapter for Transfer case shifter: Figured I'd help the brake lines and reduce heat from...
  11. KubinB

    Build My 80 Series Restoration + LS Swap Project

    Yes I found this out when the first ones came in I returned them and got the correct size. I meant to update the post but must have forgotten, I will update now.
  12. KubinB

    Build My 80 Series Restoration + LS Swap Project

    I have the "0411" with red and blue connectors. This one you can program the tach output.
  13. KubinB

    Build My 80 Series Restoration + LS Swap Project

    Little update, wanted to get this stuff out of the way before my vacation next week. Figured why not let the paint cure properly for 10 days while I cant work on it anyways. Mounts burned in cleaned the ever loving crap out of everything, etched with metal prep cleaned again yadda yadda...
  14. KubinB

    Build My 80 Series Restoration + LS Swap Project

    Ah ok that makes sense. Yea I moved up 3/4" looks like Ill have to make one hell of an adapter. I really appreciate the info!
  15. KubinB

    Build My 80 Series Restoration + LS Swap Project

    Haha yes I just realized that after I looked it up, I must have been really tired yesterday. Was hoping I could edit the post quick enough :-) Is your swap with a 4l60? my mounting point is definitely much further back than yours.
Back
Top Bottom