Recent content by kenthemover

No check engine light is on but the bulb might be blown. You say paper clip and count flashes can you please give me more details. Kenny

No codes. Can't find code machine. AutoZone said to old to use there's. No idea we're to find one around here.

I'll look around egr valve wires. I think there's 2 she's with hoses attaching to it. I did man handle throttle body around putting take off and putting on valve cover. But there was a miss before I did that. Maybe fouled plug?

I out AutoZone $64.99 wires and autolite copper plugs. And cap and rotor about 5mo ago. I did check all around throttle body for hoses that fell off. It all looked good. It does have high idol sometimes and then it's a low idol with miss still. Clogged cat's? How would I check that and...

I have a 94 land cruiser and it started with a bad miss. So I replaced plugs wires and valve cover gasket. I took old wires out of plug tubes in head and #6 had a broken stem that connects to plug. And #1 was full of oil. I replaced the plug groumets with new and wires. Now it has a bad miss...

Can't get rear disk drum rotor of rear of truck. I've loosened the adjustment sour all the way (pushing down) but still won't come off. I can shake rotor and it wiggled but that's it. Need to replace couple studs. Any tricks that might help? Thanks Kenny

My 94 land cruiser leaked in same places you talking about. And oil blew back by rear main seal and I thought same thing. Take it down and spray engine bright on it when it's warm and pressure wash the @$!# out of it. You'll see leaks much better. Good luck Kenny

I llost (it fell out) the bolt use to adjust alt belt. Can anyone tell me the bolt size please thanks Kenny

It won't slide over hub. In video the guy took hub and rotor off together and then tapped the ring off.

Can you take rotor off without removing the hub assembly? I'm trying to replace couple wheel studs and need the ring that has studs to come off. Any ideas Thanks

So what. Straight answer is all thats needed

No.tuning issues. Its ran great. Kinda getting tired over the years. Now i have a chain. Are chains bullet proof?

Ok What does my 1994 land cruiser full time 4wd have. Belt or chain. Ill get one reply its belt then another saying its not a belt. I havnt checked anything yet. Fearing the worst. After work today im going to pop cap and watch rotor. And sorry about 2nd post. Never had to ask questions...

My truck has 244k. What are chances the timing belt was never replaced. 90k is when its recommended? Thanks

Mines fj80 1994 lc