Recent content by kbuby

  1. K

    Tachometer recalibration

    Thanks, I'll look for it
  2. K

    Tachometer recalibration

    Niiice!!!! Do you have any pictures or more information that you can share with us?
  3. K

    Tachometer recalibration

    Then just secure the potentiometer in a firm place and reassembly everything.
  4. K

    Tachometer recalibration

    Then, install the tach in the cluster and test it. With the vehicle running and another tach to guide us, Turn the potentiometer to one side adjust the gain in the needle. See the video adjusting the tach
  5. K

    Tachometer recalibration

    In the back side of the tach, there are one red and one black wire soldered from the actual tach to the board. Take the 10k potentiometer and solder it. You want to solder one wire to the middle terminal (usually labeled #2) and the other wire to either of the remaining two terminals (usually...
  6. K

    Tachometer recalibration

    Then unscrew the 5 bolts marked in the picture and it will loose the tachometer from the rest of the cluster
  7. K

    Tachometer recalibration

    First unassembly the cluster unscrewing all the bolts in the cluster, take out the front clear plastic and the black faceplate.
  8. K

    Tachometer recalibration

    Hello guys, I have a RJ70 with a vortec V6 swap in it. Since I add 2 cylinders to the engine the tachometer reads a false meassure, when the engine was at 2,000 rpms the tachometer reads 3,000 and so on. I found some info on placing some resistors to the circuit on a hilux cluster and other...
  9. K

    What did you do on your 70 series today?

    Recalibrate tachometer to compensate 22r calibration to V6 swap. Detailed process in other post. Tachometer recalibration - https://forum.ih8mud.com/threads/tachometer-recalibration.1272870/
  10. K

    Gearing G52 transmission

    Hello guys, First of all hope you're having a good time in tis Christmas eve. I hope you can help me out here with an issue. I have a Land cruiser RJ70 with a Swapped Vortec engine in the Toyota G52 stock transmission, stock transfer, 5.29 gears on the diffs and 34.4" tires. i like the way...
  11. K

    What did you do on your 70 series today?

    Uffffff!!!! Marvelous work. Robbed idea, now I have an update of my project. lol
  12. K

    What did you do on your 70 series today?

    Thanks!, just need to cut a bit in the up right corner to make it blend with the cluster
  13. K

    Registry 60-series Registry

    What's up guys. Two weeks ago I've bought a pretty rusty 82 hj60. I'm planning on loosing the hole dying body and put a hj75 pickup body with a shorted bed on it. I don't know if it still count as a 60 but since the chassis will be remain untouched I have posted here. I'll start a tread for...
  14. K

    What did you do on your 70 series today?

    Lockers Wiring harness and solenoids installation.
  15. K

    Registry Post Pics Of Your Modded 7x Series

    Hello, After selling my FJ80, I bought this 93 RJ70 a wile ago. i have done some mods already but overall is pretty decent.
Back
Top Bottom