Recent content by kazanski

With current Wits End issues - any chance you will be creating more blocks (or could potentially share the file/specs)? I got screwed out of a universal arm I ordered in November, would love to have the arm but will go with the alternative of gluing up the new one and covering the existing spot...

Interested

Interested

Resurrecting an old thread, searched a bit and couldn’t find it. Are the solid rear quarter windows from the dealership tinted the same as the rear doors or are they clear?

You were right about the race removal on these! It took me about 30-40min to remove the one I already installed because there is no lip to tap it out. If it weren't for this I may consider installing these and rolling with it, but not being able to get them out later is a concern. Inside...

Just to close things out, this was the response I got from Cruiser Outfitters: So FYI to anyone looking to purchase the kit in the future. While I can appreciate that the bearings will "work" and they say no issues, also a bit disappointed that I am shelling out and extra $120 to order the...

thanks for the reply, answers/notes below: 2. This makes sense, thanks for the info. As usual I meant to measure before and instead just started tearing things apart, but based on the feel test from recently doing the front there was a lot more play. 3. This is good to know, I assumed I...

Adding/editing original post to be more specific. Initially was worried about outer pinion bearing part numbers and now I am looking at the inner bearing part numbers and looks like the same issue. This is a kit from Cruier Teq that looks like it came from Sierra Gear, so not sure if this...

Hi all - I was able to rebuild my from differential thanks help from the board, and now I am on to the rear so figured I would reach out for some help to make sure I am going down the right path. Specs: - 1997 LC - 150K miles - factory e-lockers - Stock height I have been chasing a grinding on...

Was able to source from a member, thanks to those for reaching out. Mike

Looking to purchase bumper extensions with the internal frame reinforcements in place. If you have replaced you rear bumper with aftermarket and have them laying around then let me know, no rust if possible. Forgot to add this is for a 1997 LC.

Thanks for the reply, i will need to pull my end caps and take a look, will report back.

My current one is rusted pretty bad and previous owner tried to use the hitch mount for something they probably shouldn't have. Exploring my options, looks like 51209-60111 is still available from Toyota, but not cheap. Also looking at having someone local weld it up, or going 4x4 labs since I...

Thanks, for the encouragement :) Getting it pulled looks like the easy part, scanning the FSM I see that having the factory lockers adds a bit more complexity but not anything I can't handle. Once I get it on the bench it will hopefully make more sense what I am looking at, and I guess worst...

Thanks, yeah will take a look at the FSM tonight and dig in. Not planning to buy any parts yet, just thinking ahead so I am prepared for the worst :)