Recent content by joecat66

dude that wheel got me so worked up i bought one off ebay--I just finished degreasing it, sanding the leather and doing a color change on the non leather bits with duplicolr trim and vinyl (dark charcoal) is a dead nuts match for the toyota blue/gray. The wheel I bought is nearly identical...

that sr5 wheel is sweeeet

GREEN FALLS CT---

.

brilliant

The outside rear handle has always kinda got hung up and I would have to push it flush to ensure the door would latch. Tonight I gave it a good shove and I heard something let go inside the door and clunk its way to the inside bottom of the inner door. Fortunately I can still open it from the...

there is an old school leaf spring shop not to far away from me (Palmer Spring)...I guess they heavy duty commercial stuff is keeping them going-I assume some new bushings as well? Will I get some lift w/the x

i am looking to do a bit of a budget refresh/lift on my truck. I was considering buying the dakar/emu leaf springs off amazon (free shipping!) cs004rb-cs003f a bushing kit and new u-bolts. I was wondering if any has done this, if it all works w/the stock shackles, current stock sized shocks...

final chapter After reassembling the top controls and writing my update we took the truck out to the recently opened for the season dirt roads in the Pachaug Forrest near my home for some hiking. The air diverter control is back to gliding like new...the WD must have need a little more time to...

update I had the hvac faceplate off , and was able to get some lube on the cable. The selector arm pivots off a hinge and the cable connects to it. Things up top did not seem rusted and there was a little movement. In hindsight a shot right through the middle of the selector slot would hit the...

much like the old 10 speed..I'll take that off and start spritzing thanks!

recently I noticed my HVAC selector for defrost, feet and face is stuck to the right on face. I can move it 2/3rds of an inch or so to the left but it is hung up for sure and forcing it feels like something will break. Any ideas where to begin before I tear into the dash. I was doing some...

thanks... wow it's more than the tent at least the II version on ebay is

mine was so gummed up before i swapped the lines that is pressurized the entire system such that when i removed the gas cap before a fill up gas literally shot out the filler neck and hit from neck to waist