Recent content by Jfalker1

  1. J

    Oh no loud pop!!

    Thanks @george_tlc they got pretty dirty and greasy while doing the job i didn't think to clean them off... And i haven't a caliper job since i owned the truck... I am thinking I will secure the truck on 4 jack stands and see if can better hear the sound while on the gas, but my gut feelings...
  2. J

    Oh no loud pop!!

    Finally finished with the entire axle rebuild job & replacing passenger side birf & drive flange. However, test drove my car for the 1st time and noticed a pretty loud whistling noise at about 25mph... It does not make any noise driving a low speeds 20mph or less. Seems like the faster the car...
  3. J

    Front axle knuckle rebuild kit

    @fjc-man not in the actual kit but if you plan on separating them Cruiseroutfitters sells them seperately. When i bought my kit I purchased one and a 54mm socket the new Birf Clip was only a couple of bucks. I didn't end up seperating mine so I will not be using the Birf-Clip. Everything was...
  4. J

    Front axle knuckle rebuild kit

    I am in the middle of my a Front Axle rebuild on my 1993 Cruiser, its all of about 12 hours I broke mine into days. Not nessecarily hard but a lot of moving parts my suggestion is follow the video on youtube have a buddy to watch video and pause video as you do the steps. You will also have to...
  5. J

    Oh no loud pop!!

    Correct @FJP971 i am replacing Drive Flange.. Front Birf and the inner axle shaft on passenger side
  6. J

    Oh no loud pop!!

    Thanks for everybodys help, through this ordeal I've learned so much about my rig! So in conclusion i figured that the loud pop was the Passenger Drive Flange breaking loose from the Axle shaft, then the grinding came when trying to drive in 4H with the flange spinning around the shaft...
  7. J

    Oh no loud pop!!

    @UTkruzer is def the man!! Thanks and @ReformedJeeper i drained diff fluid and used a magnet in the resvior i only found the one little metal shaving no big chunks and nothing stuck to the drain plug
  8. J

    Oh no loud pop!!

    Wat is the name of that part above that i said broke and i can get that at a Toyota dealership correct
  9. J

    Oh no loud pop!!

    Passenger side flange is broke splines wore down in this piece it will actually slipping when i put it on the end of the axle
  10. J

    Oh no loud pop!!

    Passenger side drive flanges look good to me and other components look in great shape to me
  11. J

    Oh no loud pop!!

  12. J

    Oh no loud pop!!

    Def understand that UTkruzer I will check both Flanges when I get home. However, strip a flange would not make a loud pop or would it. I mean loud it was axle breaking Loud, the noise again came in reverse. @LINUS could breaking a gear in the Trans case make that much noise. When i get home this...
  13. J

    Oh no loud pop!!

    Today I decided to go ahead and order a Front diff from DEO @ Landcruiser Junction and a right Birf Joint because the right has a little bit of play in it... However I am still puzzled of what actually Broke I mean it was LOUD POP! I figured something has to be destroyed from the sound but I...
  14. J

    Oh no loud pop!!

    No CDL and not locked.... However after it broke was able to drive in Low Gear perfectly fine, and the CDL dashlight came on showing that it was locked and the ABS sensor also came on... Also it wouldn't go into park well wanted to role and brakes weren't working the best
  15. J

    Oh no loud pop!!

    @inkpot yes 1993 Landcruise FZJ80
Back
Top Bottom