Recent content by JBLx

Seeing that we have some momentum on this thread again - can anyone confirm if my pic of my rear sensor bracket is bent?

Pics below

Looking for some input to some AHC adjustment issues. When I initially sensor lifted the car I noticed my rear sensors were opposite (RR was up and RL was down!) car was level and AHC operated fine. I lifted the RL up to make both the same and I got a little lift in the rear (much less than the...

As I have a sensor lift I’m looking at 40-50mm spacers but I’ve only been able to find some from Ukraine but will still need trimming of the bump stop. Has anyone had success with other 40-50mm spacers locally?

Thanks for the detailed reply. I tend to agree with this logic. It’s only that others are installing the upgraded coils with success. Perhaps they have more static load. For me it’s only while I’m towing (which will be constantly as I will be touring around for 12months). There don’t appear to...

I’m about to order the TT2168 just would like those who have done the same to confirm - will I likely need spacers too if I have a sensor lift and looking to tow a 600-700lbs tongue weight trailer ? I was originally looking to install 40mm spacers to the OEM springs but now looking to replace...

Agree - I would like to investigate this option but none of the spring stockists here can recommend anything that will still allow AHC to function.

Thanks for the reply. I’ve measured the internal diameter again and agree it will require trimming of the bump stop. To get 40mm this seems to be the only way without adding multiple 10/15mm spacers which doesn’t seem like the ‘right’ thing.

I’ve struggled to find a direct for a spacer more than 15mm. Found this one eBay and the sizes appear to fit. I have a sensor lift and when towing my camping trailer (tongue weight approx 600lbs) and occasionaly won’t get in H mode. I can get this eBay spacer in 30, 40 or 50mm Thoughts on...