News update.
The wire connections in the ECU OEM 89661-60710 in the FZJ100 pre 2002-08 for the O2 sensor (1B and 6A) are already occupied by a RED (speedsensor in 6A) and GREEN wire (SL in 1B to ECT Solenoid).
So:
- wire diagram engine control: 6A and 1B are for HT and OX
- wire diagram ECT...
If checking the wire diagram of the 2000-2002 J100 it seems Saudi and China had the same ECU (89661-60710) as GCC countries. But GCC is running with VAF and China/ Saudi is running via O2-sensor. The China/Saudi ports on the ECU are also different (marked with a colour).
There are 3 different...
The main differences with the #89661-60710 and #89666-60790 is that:
#89661-60710 has the fuel pump(s) relay etc. connected via the ECU and a separate Fuel pump ECU whereby the #89666-60790 ECU doesn't.
In order to exchange these ECU's the fuel wiring needs some re-directions...
I found the wiring diagram of the Saudi Spec 1FZ-FE with TWC+Oxygen sensor.
https://lc100e.github.io/ewd_overall.html?path=/pdf/ewd/sb059w/m_overall/&code=l_01
Hi, First message on this forum. Ivan from the Netherlands. Sister in Dubai so was funny to buy her old car and import in Europe. That was perhaps a mistake due to environmental rules. I have a 2002 FZJ100 with 1FZ-FE engine. As I am in need for a Three-Way Catalytic Converter (TWC) with O2...
Additional info: managed to read the OBD. No fault codes, No O2 sensors. My ECU is 89661-60710 (Australia and GCC). For GCC (China, Peru, Saudi) after 2002 there was an other ECU with number 89666-60790.
Also in the attachments the NEW FEATURES that includes a Three-Way catalyst (TWC) for the...
Hi. I have a GCC-spec FZJ100 2002 with 1FZ-FE engine. I have no catalyst, No O2 (lambda) sensor. I have a disconnected Air Temp Sensor near the airbox and I have a MAF sensor. I can't see any wiring for the Air Temp Sensor and O2 sensor. There is only one loose/ empty 6-way connector in the bay...