Recent content by Heelerdude

Beautiful!! My socket was just barely too thick to fit through the inspection hole!! Awesome tip, i used the zip tie method as well for the cleaning process.

With all the bolts removed and the fuse/relay block unbolted and swung away I was able to flex it inboard enough to get a small 90 deg angled ratchet screw driver with a JIS bit in it and get the cover off. It just has to swing in and rotate up enough to get the cover off. The hardest part is...

Yeah that will work holding them in but you still have to get it over the armature and you can’t do that with the socket in there. I ended up cutting a strip out of a milk jug and rolled it into a small tube. it was rigid enough to hold them in place but thin enough to allow it to slip over the...

I got one more to go, I will video the whole process!!

So I currently have 2 yes 2 twin 1995 FZJ80's that I am working on with exactly the same ABS 51 code and ironically the same SRS 11, 12, 31 codes...go figure but lets stick to the ABS issue which is what this thread was about. I used the jumper method to try and excite the ABS motor on both of...

JPoole, Nice fix, How did you hold the brushes back into their slots when re-installing the armature? Seems like that would be a major PIA.

Plus 1 on Craft Customs, Just got my wheel and shifter back from them for my 95 and it looks awesome!!

Left front door trim panel?

Looking for a left front door trim panel in grey leather for a 95-97 FZJ80. must be 95 and up with the courtesy light in the lower pocket. All I really need is the upper portion covered in leather that wraps around over to the glass. As you can see mine is cracked all the way through the plastic...

How about the roof speaker grilles in the headliner?

Hi I am in need of a Left Front Door interior trim panel, I don't need the courtesy lights or inside handle bezels, I just need the trim panel as long as the grey leather is intact, Also the rear roof headliner speaker grilles. let me know, Thanks.

Hey do you still have this arm rest?

Perfect Mine is a 91 FJ80. Thanks

Did you get that other set?