Recent content by Hardpine

  1. H

    LX570 preload coil spacers

    I mean, it wouldn't be super super heavy. Full armor, dual battery, 100lb-ish on the roof and a vehicle full of people. I realize the AHC can handle quite a bit, but my guts tells me some assistance wouldn't hurt for general stability while braking and turning. The concept was utilized in the...
  2. H

    LX570 preload coil spacers

    I agree. My first post listed a 20mm spacer for that reason. I guess that's why I feel a bit frustrated.
  3. H

    LX570 preload coil spacers

    It doesn't. I posted that thread to better explain the concept. I contacted Westcott quite awhile ago regarding fitment and I was told their system wasn't compatible. After I asked a few questions about the product, I received curt answers so I decided they didn't want my money. Anyway, it...
  4. H

    LX570 preload coil spacers

    Found it. Heavier springs rate that works with AHC - https://forum.ih8mud.com/threads/heavier-springs-rate-that-works-with-ahc.1247277/#post-13809653
  5. H

    LX570 preload coil spacers

    You're totally understanding. Adding preload, then sensor lifting= same spring rate. (basically) I'm trying to maintain the current values throughout the system. The AHC will need more fluid to accommodate the extra length required within each shock, but the pressures shouldn't be off by much...
  6. H

    LX570 preload coil spacers

    The Westcott design product has the correct function in mind; however, it's too much for my application. The strut spacers, that go on the top of the strut/top-hat, is a known method, but doesn't suit my intended application. I'm ok with "Hardpine, what you're looking for is not on the market"...
  7. H

    LX570 preload coil spacers

    Thank you for your response. Totally got all that. It's not a how issue. From the Initial post, "I'm looking for 20mm front proload spring spacers." Do they exist?
  8. H

    LX570 preload coil spacers

    BLUF: level LX570 with a 1-2 inch lift with OEM suspension characteristics.
  9. H

    LX570 preload coil spacers

    Thanks guys. No further input is required.
  10. H

    LX570 preload coil spacers

    Heckraiser, I appreciate your input. I've reviewed the long travel thread in the past and I'm familiar with the concepts you presented. I just wanted to know if there were any other options without committing to a long travel solution. Again, I appreciate it and have a good one.
  11. H

    LX570 preload coil spacers

    Hello everyone, I'm looking for 20mm front proload spring spacers. Westcott would be a good option if my goal was to achieve a higher lift or needed the additional preload, but I don't. Concept: BLUF: level LX570 with a 1-2 inch lift with OEM suspension characteristics. Front Add 20mm front...
  12. H

    Is there a bleeding valve on LX 570?

    According to my shop manual, there are cylinder block drain cock plugs on each side of the engine. They don't function as a traditional bleeder; however, they are used for draining of all the coolant for a flushing application. I hope this helps or clears up anything.
Back
Top Bottom