Hack

This thread is awesome and should probably be a sticky on the 1st page. I didn't read the whole thing but the 1st few pages and the videos on page 27 were really helpful. I did find some tips on the web on how to assemble the brake using a...

Got the first privacy wall installed

Three days. That's what it took me to get all the petrified masking tape off the drawers and bay door. Before: After (drawers only): They came out remarkably well, considering...

Well, it belongs to the guy's son, but he's helping to resto/mod it. Didn't ask permission to take pics. From what I got him to talk about, it's a 360/auto. The engine has 'a few mods'... The body, from what I could see was primo, paint is...

Wife wanted a towel rack that wouldn't fall apart when used. So I fired up the forge.

Oh boy. I really have a problem: Drove over an hour (each way), battling rush hour traffic for this beauty. Like a few of the other boxes I've acquired, this has a few previous owner mods. I'm sure there must have been a good reason to...

Your right about that, I used to haunt all the local Sears stores (including their Sears Hardware stores). Never saw a huge line up of all the different models. Still hunting for the last two in the series.

Done. 7 drawer + Bay lower, 3 drawer upper I got at the estate sale. Took me a couple of weeks to get it all cleaned up, liners cut, plywood 'floor' in the bay, and re-asssembled. Looks good sitting next to the other ultra clean one I got a...

Added another smaller shelf above the battery charging shelf I build a month or two ago. This shelf stores all the blending and finishing tools and supplies. Using smaller 1x1 angle and the same 14ga. perforated sheet. Prior to welding the...

The next box and downspout is located at the main entrance and drains the same section of roof. The last four are located on the north end and drain two separate roof sections and shed the most water. The one took a few angles. All the...

Completed the installation of the distribution boxes and down spouts. Starting from the south side of the house the three scuppers were a good starting point since it was next to the shop. The first scupper down spout require a slight jog to...

I won't say I'm scared of this thing, but I certainly have a very healthy respect for it!

There is a link…..

It is not a Toyota but…. It is from Japan, And it is …. loosing some weight, and getting something done about his small size syndrome. Anybody here interested to follow this?

My very first attempt at using BendTech Pro to design parts, cut them on a Dragon A150, and bend them using a mandrel bender. First try was nearly spot on. I had to adjust the top hoop 1" narrower and that nailed it. Granted, it was duplicating...

Name that Goo: Sort of looks like tomato skins, mixed in human skin. Yummy....

No. That's how clean this box is (once the red fuzzy stuff and glue is removed). Sort of remined me of skinning a small red haired rodent when scrapping off the goo... I'll be cutting some Olsa drawer liner, which is what I've used in all the...

I’m redoing my sign finally. I had an old piece of aluminum laying around so after trimming and multiple passes of the sander it’s looking smooth. I lined up the letters and screwed them down. Next is mounting holes in the aluminum frame and the...

I'm sure these seemed like a good idea at the time: Previous owner put red felt in all the drawers of the 7 + bay lower (and the 3 drawer upper). Great idea, I'll give him props for that. Unfortunately, he decided to take it a bit further...

Lolz. My FIL gets them for free and gives them to me. I use them for storing extra wood, metal, chicken feed, potting soil…etc. they are AWESOME!! STOP EYEBALLING MY TRASH CANS!!!!!!!!

Hmmm.... I see seven or eight gray trash cans (on wheels no less). Are you going to therapy for that addiction too?

Carport washed and lights working.

No, no you won't.