Recent content by forestman

I got the new baffle installed last weekend. Pulled the third member to find both baffles were loose and rubbing on the axles. I used the new one as a template and bent the better of the 2 into the correct shape and reused it on the passenger side. The new one clips in very firmly into the...

I knew I remembered something being spot welded in there, well hopefully the tabs are still there and I can pop in a new baffle, Thanks

I'm having this same issue, the oil baffle on my 8.4 on my tundra popped loose and has been rubbing on my axle for a long time to the point where it's not reusable. So you're saying the baffle just pops into place, I thought it was spot welded. If I purchased a new one from toyota for $90, do...

Sorry if my response confused you AZOR, what I meant by full time 4wd is 4wd with the center differential open which is what your previous Landcruiser had. The advantage with the sequoias is you can push a button and drive in 2wd where as a landcruiser is always in four wheel drive. You do not...

I carry one of these myself, 154cm satin spear-point. Great knife, really thin and light. There is also a new drop point plain edge in s30v which I would prefer.

1st answer: First gen Sequoia's have an awesome 4wd set up. They have 2wd, full time 4wd, and true 4hi and 4lo. Depending on what transfercase setting is applied. You can drive in 2wd/rwd only, if the roads are wet and you require more security you can drive in full time 4wd( you can use this...

Well, here is the build so far, lost my build on my local forum which has disappeared so I have to do this all over again, anyway let's get to the point. Vehicle: 03 Tundra Regular Cab Base V8 4x4 with 450,000 km Engine: Stock Bumpers and Winch: Relentless Fabrications stealth front plate...