Recent content by Derk Buys

  1. Derk Buys

    Turbocharging 3B engine with custom exhaust manifold

    Thanks for the tip! I'll post the results if we've tried it.
  2. Derk Buys

    Turbocharging 3B engine with custom exhaust manifold

    On our engine the vacuumpump is about 15 mm away from the exhaust manifold. We've wrapped the exhaust manifold and it goes very well (so far). Regarding injection timing or injection pressures, we have done nothing to the engine. We've just adjusted the fuel pump so that it delivers more fuel...
  3. Derk Buys

    Turbocharging 3B engine with custom exhaust manifold

    If it boosts, it boosts…😉
  4. Derk Buys

    Turbocharging 3B engine with custom exhaust manifold

    Thanks! We're also very happy with it. We also didn't think it would fit in the first place and wanted to make a top mount exhaust manifold instead. But when you've made a dummy to test fit the top mount manifold design, it's not hard to test fit that same design as a down mount design...
  5. Derk Buys

    Turbocharging 3B engine with custom exhaust manifold

    After welding the exhaust manifold we fitted it on a 3B we had on an engine stand to make the oil supply and oil return line. We used the oil pressure connection going to the vacuum pump to feed oil to the turbo and mounted the oil pressure sensor on a T-piece to lubricate the vacuum pump. For...
  6. Derk Buys

    Turbocharging 3B engine with custom exhaust manifold

    For a school project I’ve turbocharged a 3B diesel engine, a reliable engine but with a lack of power. I’ll take you through the design to serve as inspiration: It all started with research and calculations which led to the conclusion that the Garret GT2052 is a perfect match for the 3B. It is...
  7. Derk Buys

    Sourcing a BJ73 or HZJ73 stabiliser bar/sway bar

    Hey Juan, Thanks for your reply. It's the front axle sway bar indeed. I haven't been able to work on my car for a long time, but I've bought a front axle sway bar from a HZJ73 with the smaller diff. Based on measurements of the axle and the sway bar it seems to fit. I will post if it fits or...
  8. Derk Buys

    Sourcing a BJ73 or HZJ73 stabiliser bar/sway bar

    Hello everyone, Last year I bought a 1985 BJ73, a mate bought it as a donor car but decided to restore it later. The restauration stranded and he decided to sell it. I bought it and started disassemling it and I am currently rebuilding it. When I bought the truck it didn't have a stabiliser...
Back
Top Bottom