Recent content by David8a

Sell me the file lol, i have a printer myself just not the skills to design it.

It shows to just be the bracket, not the white plastic that holds it. I'm hoping to find the part number for the white plastic because that's what broke from the fender.

Hello, i have a 94 and im trying to find the part number for the white piece on the bracket that told the fender to the door. Thank you.

Makes sense, this means that could use a digital meter and just rotate the sensor until the resistance increases?

In the service manual, it says " Gradually turn the TP sensor clockwise until the ohm−meter deflects", what does the that mean when it says ohm meter deflects?

I will look into those this week.

It bounces between 550-700 rpm. I noticed that I hear a click and it becomes steady. Sometimes when I put it in drive and go, it hesitates untill I repeatedly press the pedal then it goes. Sometimes it doesnt do that and it acts normal like nothing is wrong. Ive removed the vacuum like and its...

I haven't driven through anything but dry pavement recently. Ive checked thoroughly on every vacuum line.

There are no codes, the o2 sensors are about 2 years old, haven't done any recent work on it, just took it on a short road trip and it started to do that out of nowhere. I haven't messed around with the tps nor I haven't checked the timing.

Ive been having some idling issues on my 94, it stumbles and ive already replaced the MAF, IAC, FPR, and fuel pump. Ive tested the fuel pressure on the fuel rail and everything was within spec. One thing I noticed was that the fuel pressure regulator has vacuum going to it when the engine is...

I finally had a chance to replace it when an oem one and it worked fine untill after a day. The truck would at least idle normal but it would then start to hesitate and stubble. What ive notice is that when I remove the vacuum line from the regulator and capped it, the truck ran fine. When I...

Ill definitely look into it, would you happen to have the part number for the 95-97 one?

I cleaned the throttle body and where the IAC ports are and tested the IAC but I still get the same results when I started it back up, when I shift it into drive, it has no power and started to stumble and nearly dies.

It happens when its cold and warm, im going to read into the service manual. Thank you!

I have a 94, and I've been trying to chase a rough idle/ sometimes stalling that appears randomly but lately its been doing it constantly. I notice when I unplugged the vacuum line that goes to the fuel pressure regulator, it idles just fine. When I put it back on it starts to stumble and seems...