Recent content by crutch

  1. crutch

    exhaust and intake manifold installation questions

    I ran into the same problem as those remflex are so much thicker so went back to the stock thickness gaskets. You want to mate the intake and exhaust together first but need to make sure that the intake/exhaust flanges are flat on the same plane to ensure you get a good seal against the head...
  2. crutch

    Help with Heat Riser Spring missing counterweight

    Thanks, I see it now. Looks like the F manifold had a counterweight not the 2F. I’ll mark it and make sure it opens.
  3. crutch

    Help with Heat Riser Spring missing counterweight

    I guess I should mark the end of the shaft and heat up the engine and see if it moves. I was seeing photos of the older 2F that had a weight on it but haven’t seen any good photos of the 60 series bimetallic spring.
  4. crutch

    Help with Heat Riser Spring missing counterweight

    It looked to me like something had broke off the end of the shaft. The earlier 2F manifolds looked like they had a crescent shape counterweight on it and I was coming across references to it but maybe that’s how it came?
  5. crutch

    Help with Heat Riser Spring missing counterweight

    I recently de-smogged by FJ60 which has been a great learning process and starting to understand all the components of this engine. I had the manifold apart and the spring and flapper appeared to be functioning however from what I can tell there is supposed to be a counterweight on the end of...
  6. crutch

    FJ60 Throttle Body Gasket Source

    Sorry for delay, had a chance to go to SEMA this year and just got back! I just picked them up after what seemed like endless hours of research. They are Nomad 504s. 16x7 -12 offset so backspacing is right around 3.5”. No spacers...
  7. crutch

    Exhaust Manifold Advice

    To close the loop here, machine shop fixed the manifold and after fixing a carb vacuum leak she’s running great and leak free. Thanks for everyone’s help!
  8. crutch

    FJ60 Throttle Body Gasket Source

    Great, thanks everyone, this forum is invaluable! I made a couple gaskets and that fixed my vacuum leak! I’ll swap in some reproduction gaskets in the future. Rebuilt carb, desmogged and running great! Super stoked right now! Oh and got some new wheels/tires. Just need to get the...
  9. crutch

    FJ60 Throttle Body Gasket Source

    Ahh yes that’s it! The PO added a gasket on one side of the insulator. Any reason I shouldn’t just get 2 new gaskets (or make them), one for each side? The insulator looks like just rubber to me. It doesn’t have a bonded gasket like the insulator plate does that goes on the intake manifold.
  10. crutch

    FJ60 Throttle Body Gasket Source

    Actually im just realizing this diagram shape is different than my heat insulator which doesn’t have the pipe coming out of it, it’s more of a rectangle shape. I’ll take carb apart to get a photo of it.
  11. crutch

    FJ60 Throttle Body Gasket Source

    I've got a vacuum leak around the throttle body insulator between the Float bowl assy and Throttle body assy. The rebuild kit I picked up doesn't have these 2 gaskets in it. Does anyone know where I can get part #77 from this diagram?
  12. crutch

    Exhaust Manifold Advice

    Thanks for the input everyone, figured I'd check and see if I was missing anything. I'm going to take it back to machine shop and then re-evaluate from there. Of course, I wacked a deer this weekend in my wife's car and could really use the FJ60 operational right now. :)
  13. crutch

    Exhaust Manifold Advice

    got the manifold back from the machine shop, installed remflex gasket (torqued to remflex spec) and had rough idle, vacuum was low and bouncing so figured I had an exhaust leak. sprayed carb cleaner around gasket and RPM's increased so I pulled everything apart. I noticed that the intake and...
Back
Top Bottom