Recent content by CriticalBill

  1. CriticalBill

    Front door wire identification

    Hello. I would like to ask You guys if You can tell me what this wire is for ? Its for front door speakers ?
  2. CriticalBill

    Tcase won't unlock

    Thank You. I will remove console tmrw to check that boot Yes. When I plug it back in I can lock TC by pressing switch or move shifter to L4 so it looks like actuator working only one way
  3. CriticalBill

    Tcase won't unlock

    I did. I couldn't disengage with shifter first and then I bought a dash switch but I couldn't unlock either. The only way I can unlock transfer case is with 9v battery connected to actuator wire terminal 2 and 3
  4. CriticalBill

    Tcase won't unlock

    Have you solve this problem ? I'm about to give up Relay , actuator and wires are also good I think that I will make separate switch just for unlocking or make completely this completely manual cable conversion
  5. CriticalBill

    Wanted Viscous Coupler 41330-60010

    Hi Dennis. I knew the shipping not gonna be cheap because of the weight 250 Canadian or American dollars ?
  6. CriticalBill

    Wanted Viscous Coupler 41330-60010

    Bump. Still looking for working viscous coupler
  7. CriticalBill

    CDL actuator spinning only one way

    Thank You Mudgudeon. I can't see what can be wrong with this actuator. Its actually a pretty simple unit. Actuator was dry inside when I removed and opened and nothing was broken. One coil was slightly burn but apart that the unit was working either with 9 or 12 v I replaced old commutator with...
  8. CriticalBill

    CDL actuator spinning only one way

    Thank You Phil . So thats what I don't understand. When I shift transfer lever to low range position, relay clicks, I can hear actuator working and locking TC both light on dash illuminate but when I move that lever to high range position nothing happens. Light still on actuator doesn't move.
  9. CriticalBill

    CDL actuator spinning only one way

    Hello everyone. Few weeks ago I decided to engage CLD by moving stick to 4L just to see if it still working. After few hundred meters I moved from 4L to 4H but the diff and ABS light stays on. I lifted the car and unlocked diff by connecting 9v battery to actuator pin 2 and 3. After that I...
  10. CriticalBill

    Wanted Viscous Coupler 41330-60010

    Hi Georg . I sent you a PM regarding vc
  11. CriticalBill

    SOLD WA: 95-97 80 series OBD2 engine harness

    Hello Sir. Do You have by any chance harness from engine bay to transfer case ?
  12. CriticalBill

    Wanted Viscous Coupler 41330-60010

    Looking for a working Viscous Coupler 41330-60010 for LC 80 Thank You !
Back
Top Bottom