Recent content by BrisFJ60

  1. BrisFJ60

    FJ LS swap AC wiring

    Son's is running a mechanical fan.
  2. BrisFJ60

    FJ LS swap AC wiring

    He upgraded the suspension with OME and a 6" lift. That lift made alignment more difficult and his tuner advised that he return the shackles to stock height, which we did. This made all the difference in the world and handles much better. It still has plenty of lift / clearance. 99.9% of his use...
  3. BrisFJ60

    FJ LS swap AC wiring

    Son's swap is nicely completed, a very clean install. He did a body off restoration simultaneously as he waited for the Advance Adapters kit for connection to the Toyota transfer case. He also completely rebuilt the t case.
  4. BrisFJ60

    FJ LS swap AC wiring

    Great info, thanks very much!
  5. BrisFJ60

    FJ LS swap AC wiring

    We put a high pressure switch in the line.
  6. BrisFJ60

    FJ LS swap AC wiring

    The engine is a build but primarily a Gen 3.
  7. BrisFJ60

    FJ LS swap AC wiring

    That will be great. But, we are running an LS .... Not one coil, but 8 😂
  8. BrisFJ60

    FJ LS swap AC wiring

    Great info LA Z. How would we go about wiring in the amp then out to the relay?
  9. BrisFJ60

    FJ LS swap AC wiring

    We've swapped a LS into son's cruiser with 4L60e. We are using FJ AC components and GM compressor and had hoses modified. We can get the compressor to run by going from switch directly out to high pressure switch and into compressor wiring. The GM wiring harness omitted the AC / ECM wiring. Is...
  10. BrisFJ60

    Disappointing experience with Cruiser Parts

    We broke the intermediate steering shaft yoke near the firewall on my son's FJ 60. I contacted Cruiser Parts (Matt) on 12/30/21 initially regarding the entire shaft and (both) yokes assembly. I was told they had it and given a price. My son decided to see if a welding shop could repair our...
  11. BrisFJ60

    FJ 60. Is the vsv necessary for AC operation?

    No stock distributor, updated before purchase.
  12. BrisFJ60

    FJ 60. Is the vsv necessary for AC operation?

    More involved than I ever thought.
  13. BrisFJ60

    FJ 60. Is the vsv necessary for AC operation?

    Excellent info! Thanks
  14. BrisFJ60

    FJ 60. Is the vsv necessary for AC operation?

    My son's FJ 60 has the updated Weber carb and header. The vacuum idle advance vsv mechanism has been removed. The AC compressor won't engage unless jumped directly to power. Is the vsv necessary to engage the compressor? We have converted to a134, replaced the condenser, dryer, low pressure...
  15. BrisFJ60

    AC Low side reading HIGH (100), High side reading LOW (100+-)

    Yes, I have a vacuum pump that also works very well. It pulled the system down to -29 and held it there without fluctuation for about an hour. No leaks
Back
Top Bottom