Recent content by BrianCB

  1. B

    FJ55 evaporative emissions hook-up options

    The vent tube extends into the middle of the tank where the end hangs on a bracket just below the indent where I have welded 4 studs, just to the left of the wooden wire brush in picture.
  2. B

    FJ55 evaporative emissions hook-up options

    The tank I have is like your 73, all the emissions ports are lined up next to each other, mine in a Dec 71 so maybe yours is earlier 71? I've never seen a tank like the one in your picture (but I haven't seen that many). I've pulled my tank and bought a stud welder, I've been able to pull...
  3. B

    FJ55 evaporative emissions hook-up options

    It started after rebuilding from a major disassembly and restoration of the entire vehicle. The gas cap has been replaced after the collapse and I haven't had any vacuum problems since then. The vent tube attaches to the fill tube about half way up the fill tube. The vent is definitely not...
  4. B

    FJ55 evaporative emissions hook-up options

    The vent tube itself isn't spilling gas, it's just not working once it's submerged inside the tank. The gas is spilled because it's not going down the filler tube quickly because once the vent tube is submerged inside the tank, air can only get out the filler tube. So I've got gas trying to go...
  5. B

    FJ55 evaporative emissions hook-up options

    I have a Dec. 71 FJ55. Some time ago the fuel tank developed a vacuum that caused the tank to collapse inward from the top. A shop dropped the tank and pressurized it and managed to make it less concave but it still is caved in a bit. The problem I have now is when I go to fill it up, the...
Back
Top Bottom