Recent content by Brian Chambers

  1. B

    Lean in first three cylinders, cause?

    I will look more closely. What am I looking for? Was it obvious once you opened the harness? Did you have a misfire code? The lack of CEL is mystifying to me!
  2. B

    Lean in first three cylinders, cause?

    I ran some Seafoam through it last month when I first noticed the detonation. No effect. I pulled the distributor cap; looks fine. I checked the timing; 3 degrees on the money. I changed the plugs, which is when I discovered that the first three had a white ash build up. Looks like the...
  3. B

    Lean in first three cylinders, cause?

    Replaced valve seals last summer, no more blue smoke on start-up, cut oil consumption drastically. Didn't mic anything, but everything looked and felt good when I put it back together. Vacuum is good, I chased down a leak recently. Distributor and plug wires are two years old, look great.
  4. B

    Lean in first three cylinders, cause?

    Up here north of the wall we call preignition detonation "knocking". It's definitely detonation noise, as if the timing or mixture were off.
  5. B

    Lean in first three cylinders, cause?

    Wiring harness looks and feels sound. Moved it around while running, no change.
  6. B

    Lean in first three cylinders, cause?

    96 Lx450, 190k. Knocking and loss of power under load at low rpm. First three plugs have a crazy amount of white ash build up, other plugs look great. Timing is at 3 degrees, no cel. Good power at mid to high rpms, significant loss of power under load at low rpms. Question is why ash...
  7. B

    Burning oil--1 quart per 100 miles...Valve guides

    Move the piston to BTC, feed a couple yards of clothesline down the spark plug hole, move the piston back up slowly until it squishes the clothesline against the valves. Work on valves, move piston back down, pull out clothesline. There's a video on Youtube of a couple tuner guys doing it...
  8. B

    Burning oil--1 quart per 100 miles...Valve guides

    I bypassed my load proportioning valve and my anti-lock brakes using the tutorial on this forum. Running that way for a year now. Brakes bled easily, work better in all ways. I drive in lots of snow (Vermont) and never missed either system. Highly recommend it! If you decide to replace...
  9. B

    For Sale Cladding, Flares, Running Boards 96 LX450

    I have them, they are on the truck. Flares, cladding and running boards are for sale. Good luck, Brian
  10. B

    For Sale Cladding, Flares, Running Boards 96 LX450

    Complete set, professionally removed, excellent condition, "Champagne Pearl", all hardware included. $1,500 plus actual shipping expense from Vermont. e-mail at bchambers@chefdrew.com.
Back
Top Bottom