Recent content by Blain

Does anyone happen to have a set of 460 stock cross bars laying around? Looking for some for a project. Bars themselves don't have to be in perfect shape, just the end silver pieces that connect to the stock rails have to be in good shape.

11/5 Top of Christmas Mountain.

I have a 2016, no hitch, Icon Stage 3, KDSS spacers and 285/70 Wildpeak AT3's. The 285 would not fit inflated. I ran the numbers and a 275/70 is less than 2% difference in diameter. So I went with the 275 for the spare. It fits fine and allows articulation of the sway bar. The diffs are...

I have a lift, no towing hotch and KDSS spacers. There's a thread where a guy with the same setup as me fit an inflated 275/70-17 with about 3/4" to spare. A 285 is about 1/2" taller than a 275. But being by myself and trying to wrestle the 285 up there, got it about halfway, I didn't feel...

It's a 2016 so no individual tire pressures. I'm going to go with a 275 instead of a 285 so I can keep the 275 fully inflated. I tried to fit the 285 this morning and it was close but wouldn't go all the way without deflating. I don't want to look at that light the whole time either.

I may need to deflate an oversize spare to get it to fit under the GX in the stock location. Does anyone know if you can delete the TPMS sensor for the spare via programming, leaving you with four? My Techstream doesn't see anything other than codes for the GX, it's an old one I used for my...

Just confirming the left side of your drawing is the passenger side, correct?

This'll be my first one. 👍