Recent content by BJRowles

Update: Repaired wiring harness and replaced the VAF and 02 sensor. Still have the same fault only I have no error codes this time. I read on another thread that I could have a fault not electrical but mechanical and not throwing a light. Stumped where to start as I've replaced nearly...

Update on previous post, those service manuals still aren't matching what I have in my car Going to try to replicate the issue and isolate which cylinders are missing Update on the link i posted earlier, those service manuals still aren't matching what I have in my car. The 70 series diagram...

I think I found a winner here, both of the 1992 PDFs under the 80 series tab seem right so far. https://www.cruisercult.com/factory-service-manuals

Very good point, I was just thinking to myself how I'm going to check that with all the intake still on 😂

Exactly the reason why I wanted to find the right wiring diagram, I know these harnesses splice and piggyback off different things. Absolute legend for finding that, I'll have a gander and see what I come up with.

Seems completely random, although this is something I have not checked yet when this issue occurs. Thankyou for the advice, I'll be having a look shortly at the injectors.

Its a 3 pin connector, please refer the photo attached. You're more than likely correct about the worn out wiring, hence the need for the correct wiring diagram so I can check voltage drop, continuity and shorts. Is there a common place on these engines and wiring harnesses for moisture...

I mean true, but would be nice to have the correct diagram too. 😅 04/1993 according to the plate in the engine bay.

I mean true, but would be nice to have the correct diagram too. 😅 04/1993 according to the plate in the engine bay.

Hi all, as the title suggests, I'm after a wiring diagram for Australian delivered FZJ80R's. Specs on my 80 are as follows; 1993 1FZFE GXL Manual Right Hand Drive Australian Delivered (99% sure of this) Pre catalytic converter oxygen 02 sensor No EGR I am currently diagnosing an issue with...

Hi all, as the title suggests, I'm after a wiring diagram for Australian delivered FZJ80R's. Specs on my 80 are as follows; 1993 1FZFE GXL Manual Right Hand Drive Australian Delivered (99% sure of this) Pre catalytic converter oxygen 02 sensor No EGR I am currently diagnosing an issue with...

Hi everyone, I'm BJ from the south east coast of Australia. I own a 1993 manual FZJ80R. The photo taken is on the sand dunes at Stockton Beach (circa 2021) Thankyou for having me!