Recent content by bikeshikesbeers

  1. B

    Low RPM/Idle Issues

    I'll give this a check!
  2. B

    Low RPM/Idle Issues

    Thanks for the advice. Figured out things were askew when I tried the lean drop method and couldn't get the RPMs low without the thing dying. Doesn't mean I didn't do it wrong but definitely idling rough at the moment. Probably going to go through the process again to make sure I did it...
  3. B

    Low RPM/Idle Issues

    Slowly getting my 60 running smooth and have hit an issue others have faced but with a twist: • Was having serious hesitation and almost stalling when the engine was cold and I would apply gas. This was only at low RPMs and as the engine warmed up it seemed to vanish. Here's what I've done so...
  4. B

    Knuckle rebuild + upgrade questions

    Good to know! This is what I was curious about was the use case for upgrading the axles and joints. Thanks!
  5. B

    Knuckle rebuild + upgrade questions

    Was looking at taking on a brake upgrade later this year. Been researching the forums for recommendations on that as well.
  6. B

    Knuckle rebuild + upgrade questions

    Yeah glad I took it to him! The knuckle rebuild seems like something I can take on myself given my space and time limitations without buying a ton of specialized tools so I’m wanting to do that myself.
  7. B

    Knuckle rebuild + upgrade questions

    220k, has all service records since purchase and is in pretty great shape. Just been lacking some love the last five years. Took it to George at Valley Hybrids for a transmission, transfer case, and steering box rebuild and he recommended the knuckle rebuild as well.
  8. B

    Knuckle rebuild + upgrade questions

    As of now I don’t wheel a ton and if I’m honest with myself I’m not sure it will see a ton of crawling. Was more concerned with the additional horsepower an engine swap would add. (Thinking possibly an lq4 which would bring it up to just under 400)
  9. B

    Knuckle rebuild + upgrade questions

    Planning a knuckle rebuild on my 60 and am considering upgrading the birfield joints and possibly axles during the rebuild since I’ll already be in there. Unfortunately I’ll have to make this decision in advance as I’ll have to complete the rebuild in a maximum of four days. I’ve been toying...
Back
Top Bottom