Recent content by BenTN

  1. B

    SOLD Atlanta: 100 Series 2nd row seats (40% and 60%)

    Please let me know if it falls through. I'll take them.
  2. B

    SOLD Atlanta: 100 Series 2nd row seats (40% and 60%)

    Do you have additional pictures of them unfolded, showing the cushions? I'm in Nashville, so it would be an easy trip.
  3. B

    Steering wheel compatibility PSA

    Anxious to know if it will work. I have an '01, and I'm totally down with doing this swap instead of keeping the original.
  4. B

    How To: Replace your own steering rack

    I just have to say, if you're going to do it yourself, use the engine lifting method. Thanks to a POS aftermarket rack from P@rtsGeek being valved in reverse, I'm doing it for a second time (with a rack from Toyota). I used the method in the Toyota manual the first go-around. Using the...
  5. B

    Replacing Tie Rod Ends

    With the smaller puller, it was on a bit wonky because of the dust shield, so we used a Snap-On adjustable wrench handle as a balance point. It BENT the wrench, and then the puller snapped. Thanks for the reference on the steering rack...that's the thread I used for pulling the old one...
  6. B

    Replacing Tie Rod Ends

    ^^^I tried the smaller one of those pitman arm pullers, and it broke on a ball joint. :( I'm new around here (just bought an '01), and I'm having to replace the steering rack, upper/lower control arms, and front axles. Thus far, I cannot find an 'easy' way to break the ball joints free, but...
Back
Top Bottom