Recent content by Bayan Dundee

thankyou for that, at present I don't have the dimensions and will have to wait until next trip to town,(5 hrs away) so I can go to one of the 4wd shops and take measurements off 1 of their bullbars, want the universal mount to take the high and low mount winch. Will be in touch when I have it.

will organise a time to sit down with them and do up the file, issue still is where do I get the measurements?, only have my hand made mount setups with slightly repositioned holes to make fit, would prefer an accurate cut to start with if getting machined. Then not a cad file, but now need a...

Thanks for your reply, I had assumed that with it being a universal fitment across the majority of winches, that I would easily be able to find a file with the bolt hole, slot positioning, and size for a high/low mount winch set up, that I would be able to load into a CAD program, and move...

Hi Guys, Am looking to make up a winch bar, the local steel merchant has CNC machining to cut plate out to the desired size, they do not have a file for a winch mount hole and slot positioning, just wondering if anyone out there has, or knows where to find CAD specific files for this, required...

custom job put into a 75 series with leaf springs, will have to cut and weld a lot to convert another housing, thinking easier to have a go at the spindles on this one, have a pair already lying around ready to go.

I have an 80 series rear housing with buggered spindles from spun bearings. Thinking about having a go at welding on new spindles cut from another diff housing, just chasing some advice from people who have done this. Where I am there are no off the shelf alignment bars and pucks available...

seen that, bit expensive, seen how you can also mount to the other side of the thread boss and eliminate the need for the spacer, will have a look and see how things fit, thanks.

thanks for the reply, looks like I have the right parts, assume the hub spacer sets the rotor back around the 20mm needed for the caliper to line up with the bolt face, does that mean that the rotor no longer sits in the machined surface that usually supports it?, will look for one online, is...

Hi Guys, am looking to widen the track on my "85 75 Series , have heard that it can be done with some later model hilux bits, just wondering what are the components that I need? I do have brake and hub bits from a '92 VZN 130 hilux V6 (rotor 291 diam x 25mm thick), these don't mount up, what do...