Recent content by AWESOMEvoltron

Bump

Sorry I've been traveling quite a bit lately, best way to get ahold of me is by text via the ad. I try to hop on Mud every other day. Thanks!

95 FZJ80 - 5.3 Vortec 4l60e

Other projects await. . . . .

I did the swap, I use to work at a shop that did LS and Coyote swaps. I did have a shop do the exhaust, AC and go through the electrical to make sure it was done correctly as well as on over all safety check.

I did all the work I have experience working in a shop doing the same swap. I did source out a shop to do the AC, tach wiring and to go though the truck and make sure the work I did was safe and done correctly. DM me

1995 Land Cruiser FZJ80 LS SWAP Feel free to contact me with any questions!

If I were to do it all again I would have just bought the PSI wiring harness from the get to and just done the stand alone instead of trying to make it emissions compliant. The wiring took up so much time but fortunately I had some help from Rockjock82, which I am very grateful for. There are a...

did it help?

Not sure I need to take a look at that when I get a chance after work tonight.. I ended up ordering the Slee control arms and the adjustable rear. Everything at this point is pointing towards incorrect angles.

Updates... Good and the bad... 3 starters later after intermitted no starts and only a single click when I turn the key. I decided to replace all of the battery cables as I used the stock GM ones like a cheapo, turned out I had "slightly" corroded cables. Replace the front drive shaft I had...

Nice to get a little dirt on the tires today! Trucks been running good! The power steering seems to be making quite a bit of noise now not sure if its just the GM P/S Pump going out or another issue. Also getting more driveline vibration at 50mph - 70mph but hoping that will be fixed with the...

Can you Pm me if this is something you're still offering thx

From my understanding its because I wired the starter wrong. I used the wrong 12v source (Toyota) to power it so it didn't match up with the correct H1N connecter correctly went I went to merge the 2 harnesses. I used the Blk/White wire that came from the trans connector and wired it directly to...

Just a multichamber magnaflow muffler with a resonator. I like the sound its quite when cruising and it has some bark when you punch the gas, just enough to tell its not stock. I haven't noticed any vibration with the dirty dingo mounts seem to work good. I'll look for the part number on the...