Recent content by Aquafink

  1. A

    FZJ80; NO HEAT

    Water pump impellor was bout gone. New water pump has her blasting hot air!! Thanks for the help.
  2. A

    FZJ80; NO HEAT

    Water pump was shot. Blasts hot air now!
  3. A

    FZJ80; NO HEAT

    Solved the problem. Water pump impellor was shot. New water pump got it circulating and heat blows ht now!
  4. A

    FZJ80; NO HEAT

    When I put the garden hose in the open radiator when it running( just started) and the driver's side inlet pipe is off the valve, I can see coolant gush out so I know it's not clogged. Got a new water pump coming and have read radiator cap might need tabs bent more to insure pressure. Driving...
  5. A

    FZJ80; NO HEAT

    Thanks. I disconnected the inlet pipe and return pipe, added a clear plastic tube between the two, and with the coolant level full and engine running, there is no water flow. I'm thinking after about 8 hours of core clean- outs and rear heat unit removal and cleaning that my problem might be a...
  6. A

    FZJ80; NO HEAT

    Thanks. I'll try that.
  7. A

    FZJ80; NO HEAT

    No water getting into cabin.
  8. A

    FZJ80; NO HEAT

    I disconnected the driver's side rubber pipe that attached to the heater control valve. Does the water for the heat originate at the thermostat and run through that metal pipe rearward? Thanks.
  9. A

    FZJ80; NO HEAT

    How much of an angle must the truck be on for burping to be effective? Thanks.
  10. A

    FZJ80; NO HEAT

    No.
  11. A

    FZJ80; NO HEAT

    Just bought a '97 80. Heat blows cold. Front heater core flushed and clear. Coolant level OK. Temp valve opening. I noticed that there is zero pressure on the inlet hose( driver's side) when engine is running. Then I noticed that when I pressurized the radiator with a garden hose water blasted...
  12. A

    No heat.

    Thank you.
  13. A

    No heat.

    Just bought out first 80 and the heat blows cold. Coolant level good. Flushed the front core. Tested the heater control valve( good). Noticed that when I removed the driver's side pipe supplying the core hot water while the engine was running there was no flow. Not even a trickle. Then I removed...
Back
Top Bottom