What a great weekend! Good friends, good trails and good food - Fall Crawl 2026 for the win! Thank you to all who attended, and a special thank you to all who made this event possible - Andrew, Kevin, Brian, Faith, Chris, Jake, Matt, Jeff + Mark...
A few shots of my 40 in its element. Thanks for the great weekend fellas. The 40 drove there, wheeled, and drove home without a single hiccup. Great first Fall Crawl!
My truck is out for this crawl.
Will need to cut the bracket off or cut into the frame to service this steering box as both the upper and lower bolts were ground some to fit, and then welded in place as pictured here. Classic PO stuff. I won't...
That sounds awesome, glad I saw this. My rig is running good ever since OTRAMM fixed the brakes. What I need to finish doing to prep for Fall Crawl:
1) Finish installing the twin stick kit - got the Hi/Low installed - need to finish installing...
That’s the main shaft that the gear set rotates on. If I remember correctly, there’s an O-ring on the end of the shaft that seals it preventing oil from leaking out. Could be your seal is deteriorated causing the leak. You have to split the case...
Thanks for that. Last night I was able to pull the shaft up more to where it seated inside the notch. The key was to wrap a rubber band around it, slide it down, and that held it in place while I slid the new lever arm on from the top.
I...
You'd spend way more than $3k just buying late model top with the side vents, doors, ambulance doors, OEM grey 79-83 driver/passenger seats and jump seats, intact emissions, etc. The engine compartment is 100% stock without three decades of hack...