H2o
Reactions
82

Latest activity Postings About

    • H2o
      I was wondering how you might clean the plastic from the blower assembly that sits in engine bay. I have seen people paint it, but i was wondering if anyone has success using a chemical or anything else? I started the process of restoring mine...
      • IMG_1830.webp
    • H2o
      “That 4 terminal plug could be for the ignition switch (20)”. My ignition is already plugged into harness. I think this is an accessory of some sort. Almost everything is plugged in. I think the only thing I am missing is the brake light. I...
    • H2o
      Finally, behind the ashtray, these two wires, I believe are the Inspection light connectors.
      • IMG_2175.webp
    • H2o
      Behind the brake light which I’ve misplaced in my clutter, there is a plug. Does anyone know what this goes to? I traced the two wires labeled brake light to the master cylinder.
      • IMG_2177.webp
    • H2o
      I have been trying to locate the power wires for the radio on a 1974 FJ40. I found a bunch of mysterious wires from the OEM wiring harness. The ones directly behind the radio are red solid/black stripe with a female bullet connector, and the...
      • IMG_2189.webp
      • IMG_2188.webp
    • H2o
      H2o replied to the thread What is the light bulb under dash?.
      it is on my 74 fj40.
    • H2o
      H2o replied to the thread What is the light bulb under dash?.
      I though that today when took the picture. I did not realize it had one. I will have to check if the switch is lighting up or not.
    • H2o
      What is this light bulb that is hanging under my dash? It is adjacent to the fuse box, missing from this picture...
      • IMG_2107.webp
    • H2o
      H2o replied to the thread 74 air cleaner original color.
      Those brochure pics are really something to look at. Everything is so clean :oops:. Ok. I am going to repaint black. Any idea on how to clean out the inside? I have to weld two studs back on. Though it has been holding for decades with the two...
    • H2o
      I looking to repaint my air cleaner from my 1974 air cleaner. Mine is blue and I was wondering if that was an original color? Besides a few paint drips, if it was repainted, they did a really good job. Other question, how would you clean the...
      • IMG_2098.webp
      • IMG_2099.webp
      • IMG_2100.webp
      • IMG_2097.webp
      • IMG_2096.webp
    • H2o
      Anyone what the color of the original tape was?
    • H2o
      H2o replied to the thread ‘69 Time Capsule.
      When I said stock, I meant not modifying. Drum breaks work great as long as they are adjusted. Obviously you need to replace all the hoses, belts, etc. and tires...
    • H2o
      H2o replied to the thread ‘69 Time Capsule.
      I needed a new tool :bounce:
    • H2o
      H2o reacted to RevISK's post in the thread ‘69 Time Capsule with Like Like.
      These are very handy for lubricating cables...
    • H2o
      https://www.protapes.com/products/pro-pocket-spike-stack-dark/ Or https://www.protapes.com/products/pro-gaff-pocket-plus-fits-in-your-pocket-or-camera-bag Seems line Uglu is now Protapes. But 3M also makes some. Though the 18mm width does not...
    • H2o
      It is definitely OEM because you see it in some eBay listings. Some of them had them others did not. They must’ve changed the housing as time went on. Does anyone have the spec for replacing the tape? I want to take the motor apart so I can...
    • H2o
      Does anyone know why there was tape around the original heater motor housing? It seems to be a fabric tape. Was it to keep dust out?
      • IMG_1847.webp
      • IMG_1845.webp
    • H2o
      H2o replied to the thread coolant temp sensor spec.
      Found it in Haynes manual.
      • IMG_1825.webp
    • H2o
      H2o replied to the thread ‘69 Time Capsule.
      Keep it completely stock. I wouldn’t mess with the brakes. Once you start modifying, it is a slippery slope and it will lose value. Plus you get to drive it as it was out of the factory. Which is cool, and as someone said earlier becoming rarer...
    • H2o
      H2o reacted to tyama's post in the thread ‘69 Time Capsule with Like Like.
      There's a lot of great ideas posted so far. however, looking at the pristine condition of the vehicle, I would hesitate to do anything that would remove it from OEM. I know that the safety upgrades: disk brakes, dual brake MC, etc... are...
    • H2o
      Anyone know offhand the range for the coolant temp sensor spec for a 1974 fj40? My engine temp is reading off on the gauge cluster.
  • Loading…
  • Loading…
Back
Top Bottom