AimCOtaco

With the price of the brake assembly with master cylinder getting lower, I think this should become a maintenance item once the truck hit 200K mile. After all, brake is the most important safety feature. $1500 is still high, but it came down from...

This past weekend RS had the annual Snow Run. It was awesome. The coldest I saw was 7F. 45mph gusts. The Super Cruiser put in work! Pulled out a few trucks with snatch straps and my winch. Used the supercharged V8 to blast up through the last...

Rolled over the big 300. Forgot to get a photo at the exact moment oops. About 25k miles on the blower. Running better than ever.

I've no doubt. A non replaceable seal in master. Is screeching at you. https://forum.ih8mud.com/threads/brakes-overdue-write-up.1230968/ These so called rebuild master. Are simply, rebuilt motors. Best case, they have a rebuilt motor with new...

Fuel Pressure Gauge 12mm Banjo Bolt to 1/8npt Adapter - GS-FA-BANJO-Honda

Ok. All good. You have nothing to worry about regarding OBD2 as we build this into the harness for you and can be extended to reach any area of the vehicle you would like to have the connector placed. Yous systme is a CAN system so there are...

1UZ, 2UZ and 3UZ Wiring services for engine swaps. Wiring services done on all Lexus V8 Engines. Easy three wires to run the motor. Ignition Start and Fuel. We also give Temperature, Rev Counter, Tacho and Charge light as a standard for your...

It does sound a bit like the throttle motor/clutch. Can you unplug those and see if the sound goes away? Where is your PCV hose? It looks blocked off at the throttle body. EDIT: Wait, did the belt snap while chasing the noise? Or did the belt...

great step by step...I am a 2:banana: mechanic at best and I was able to complete this exact job over a year ago...over 20k of miles since and still working well. This was my alternative to entire replacement when I started getting spongy...

It's really best to order parts using ones own VIN#. Example; there is a variation between early to late 2000 brake master. Order the wrong one and wire harness block will not fit.

From another thread somewhere: The correct ABS booster + master cylinder assembly depends entirely on the manufacturing date of your 100 and whether or not you have VSC: 47050-60010: without VSC; 01/1998-07/1999 47050-60012: without VSC...

In OP, I mention how brake fluid gets the wires and flow along them into the boot(s). Most often, the fluid comes out the reservoir cap due to overfilling. Actually, it's 99.99% impossible for the fluid to leak from inside the black plastic...

ABS unit (AKA black box & sliver block on side of master). ABS unit, is not meant to be a serviceable part. But I want to go ahead and show some of it's workings. It's attach to masters body with 6 bolts. Between the master and sliver block is a...

Here's the silver blocks, coils removed (busted apart).