Landpimp

I've had these Wiper Motor Terminal Covers accurately reproduced from EPDM Rubber. These are made using a Mold designed exactly as per original specification. $78USD / pair.

There are two different mounting variants on the rear axle housing itself. Early: https://cruiserteq.com/park-brake-cable-oem-toyota-fits-8-1980-4-1985-fj60-pb60100/ Late...

I just received my Dexstar 16" conventional wheels. My plan was to make a pilot so I could cut the centers out with a hole saw. I bought the Milwaukee 4.25" 'hole dozer' hole saw last week, but when I unboxed my wheels and started figuring out...

After a coat of self etching primer and Hammerite.......

One hub has broken studs, the rest is okay Make me an offer on this stuff. I want to make sure it fits on a flat rate box

its been years but if I recall I just drilled holes in the bottom of the tuffy and mounted it directly to the old console brackets(what you have), I moved it rearward a bit at the same time been working great for close to 20 years edit, I also...

OEM steelies, widened to 15x8 with OEM caps (with approx. 100k miles on the wheel build) and new 33x10.5x15 BRG M/T's.

I had no problem doing that in my 20s, but now in my mid 40s that just ain't in the cards.....

I’m 100% team carb. Get a rebuilt Aisan by @mattressking I’ve our 85,000 miles on my 60 with various carbs. Just stay away from city racer Fuji carbs. They failed me twice.

Haha for me it is usually 5 minutes and because I already see the failures! Quick and easy, the failures are at the connector housing and fail due to vibration/removal. Reflow these points and/or add solder and be on your way. Perhaps its my...

Another option to consider is this Continental head unit. I have it in my 911SC and it is a great unit for the $$. Planning to put one in my FJ60 this winter also. https://www.bergvillfx.com/products/continental-tr7412ub-or EDIT: here is a...

Replace your s***ty old battery terminals with some good ones and then come back if you still have a problem. Will I promise this is the issue? Nope. But you really need to put some good brass marine style terminals (with crimped on lugs) under...

The seller was last seen Dec. of 2021 - doubt you'll hear from him.

New year update: I’ve been enjoying a little post-holiday lull lately over here at CTP. I’m in the middle of a transfer case rebuild project, with a power steering gear box re-seal on deck after that, plus a bunch of little things on my daily...

I have a kit that replaces the FJ60 fusible link with fuses that you can find in any auto parts store. It’s plug & play and takes about 15 minutes to install - zero electrical experience necessary. You can find it here. I also have several...

Yup. Me. Bezel (Grey) is also absolutely perfect.

Absolutely perfect. Would it be blasphemous to say, maybe even better than OE?

most all the online toyota parts dealers show it in stock,, so it should be available at your dealer or online or from cruisermat above I don't use these places(loyal to local dealer) but have found them to be pretty accurate when checking if...

This is currently for sale on eBay. Please message me with an offer if you are interested and I will end the eBay listing and sell direct to you. eBay takes too many fees. https://www.ebay.com/itm/196327577248 Full quad headlight conversion...

Reproduction of often-missing clutch fork return spring tab / bracket. Easily hand-bent to suit whichever side your slave cylinder is mounted on. Available in mild steel for $15 or stainless for $18. Also have OEM springs, bolts slave cylinders...

Hi All- I wanted to share a product we are launching in late April or mid-May. It's the 2-Port Lower Thermostat housing for the 60 series that require smog compliance. We will have the item listed at $89.99. The factory casting this part for...

Productive yet not exciting work today. I got the exhaust cut out and then successfully separated the intake and exhaust. Cleaned it all back up and reassembled with a new set of Remflex gaskets. I pulled the shafts and have the transmission...

Next up. June 1986 FJ60. We shall call it Woodrow.

@wngrog Man, I lust after those wheels. As soon as I put my money towards necessary things I keep telling myself I'll spend some on vanity items. I'll report back in 2029. Thanks for the shout out on the seat bumpers too! FYI, those are not 3D...