tailgate window channel rubber available

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

N

n2666s

10 Year 15 Year 20 Year
Joined
Feb 21, 2006
Threads
38
Messages
2,700
Location
United States
Ok, here is the deal; 4 of us pig owners got together and had 100 ft of this tailgate channel rubber made up; Inge graciously sent us a sample.......we had the tooling made up at our cost + a run of 100 ft and now we now have tailgate channel rubber; this was now longer available "unobtanium" when we checked; 2 ft 10 inches are needed for each tailgate window; this is new rubber and should hopefully last another 30 years; we are are selling 3 ft for 20$ + shipping and the money will go into a "kitty" to have dies fabbed for the "unobtanium" door glass channel rubber"......SOR has ONLY one left although has it listed for front and rear and no plans for any more:frown:.........conversation had with their parts man last week:frown:......when this window channel rubber deteriorates the glass slides out of the holding channel and hangs up in the grooves; one of my windows is doing this and after looking at the others; it is only a matter of time before they will also!

Lou
 
Lou I am not sure what part, are you talking about # 26

138b.gif
 
Im in. how and where do we pay the kitty. Would it not be better to put the money in a trough? what if the kitty runs away with the money, gets hit by a Jeep, and the guy driving the jeep keeps the money. Just a thought.
 
yep, it is part 26; when that rubber channel goes bad the tailgate window will start to slip out and ends up "hanging" sideways; then you have to beat it down to open it but it just gets worse as after a while the glass will slip totally out of the channel and bind............4 of us got together and got the dies made + a run of 100 Ft; you only need 2 ft 10 inches to do a tailgate channel; we are sending out 3 ft sections so there will be a bit extra....all of us pig owners will be needing the door window channel rubber; some sooner, some later....it is also unavailable and will have to pay for the tool maker to fab the dies for the rubber extrusion; thus the need to put the money back into the kitty :); you can PM me your needs on the tailgate rubber...........20$ + 7$ shipping; HTH

Lou

Lou
 
you can send me either a check or paypal; 20$ for each 3 ft ..............shipping is around 7$ for one strip up to 4.....looking forward to getting the window channel regulator rubber made up next 3-4 weeks; am hurting for this rubber also....... one of my windows ......PS front binds when letting it down and the rest are pretty loose in their channels...only a matter of time before they crap out:frown:

Lou

tailgate regulator channel rubber gone out to
Eric Ellis
RomeGADave
Luke111
NuclearLemon
Lil'John
Tyama
DesertLake
to
Ming89FJ62 in the morning
 
You must log in or register to reply here.

Share this page

Back
Top Bottom