real time help needed h55f install.

[westgate]

hey i hope someone can help me. i thought i would be able to find all the info i needed on Mud but i can't.
i got the 4 speed out and am about to put everything back together but don't have a FSM. I know stupid to get this deep without one.

I was hoping some one could give me the torque specs for the flywheel bolts.
pressure plate.
bellhousing bolts.

your help would be awsome thanks
tyler

 

[westgate]

actually not all parts are off yet can't seem to get the flywheel off. bolts are out but it won't budge. do i need a puller? or?

 

[Joe_E]

pressure plate/clutch cover - 14ft. lbs.
bell housing for FJ - 47 ft. lbs

 

[Joe_E]

actually not all parts are off yet can't seem to get the flywheel off. bolts are out but it won't budge. do i need a puller? or?

smack it with a rubber mallet

 

[westgate]

thanks joe_E.

 

[Dynosoar]

Flywheel is about 75 ft/lbs.

Dynosoar

 

[3_puppies]

smack it with a rubber mallet

I use a smaller crows foot bar. careful that flywheel is heavy

goodluck putting the transfer case back together with out the FSM

 

[Spike Strip]

Index of /Cruiser and M416 Manuals


Use Blue or Red loctite on the FW bolts.

 

[westgate]

thanks guys for all the help.but im shuttin it down for the night.tranny is ready to go in, in the morning.