Wanted Wtb Aisin manual hubs

[Bjordnolf]

Location

United States

Either solid axle or ifs in good working order.
thanks

 

[CardinalFJ60]

since you're "local"

check out Yota-yard...they might have them.

 

[orangefj45]

i have a complete pair of ifs hubs in great shape for $100 shipped.

 

[vtcruiser60]

I have seen them in salvage yards for 30-40 a pop.

 

[orangefj45]

to me that means that my offer is very reasonable.

consider this:
if you were to go look for them at the wrecking yards,

you'd have to invest a bunch of time to find a good set

hopefully they'll be intact and have all the hardware with them

hopefully they were removed properly and nobody damaged the hub body during removal

if you spend $40 each then you'll end up paying close to $90 for the pair including tax

on top of that they might charge you a core charge!



or you can just take 5 minutes of your life and buy mine!

 

[shelfboy1]

i think ifs hubs are 27 spline and wont fit solid axle good luck

 

[Bjordnolf]

I am going to be rebuilding them with different hub gears so it wont matter. 100 bucks is more than I want to spend, they go for 30 bucks or so on the bay. Thanks for the offer though.

 

[orangefj45]

they do come up on ebay, but you won't get them for $30. a clean good used set normally ends up between $80-120 plus shipping.

http://cgi.ebay.com/ebaymotors/Pair...temQQhashZitem130119977384QQitemZ130119977384

http://cgi.ebay.com/ebaymotors/manu...120949478QQcmdZViewItem?hash=item320120949478

http://cgi.ebay.com/ebaymotors/1988...124748260QQcmdZViewItem?hash=item180124748260

http://cgi.ebay.com/ebaymotors/TOYO...122135491QQcmdZViewItem?hash=item250122135491

http://cgi.ebay.com/ebaymotors/TOYO...122136429QQcmdZViewItem?hash=item250122136429

if you watch the ones above you might get lucky and score some for a decent deal.

best of luck!

 

[sine80]

I am going to be rebuilding them with different hub gears so it wont matter. 100 bucks is more than I want to spend, they go for 30 bucks or so on the bay. Thanks for the offer though.

Lemmie know if you find a set for $30 complete. I'll buy em

 

[vtcruiser60]

i have a complete pair of ifs hubs in great shape for $100 shipped.

Bump for a good price on a hubset you can trust. $100 is not bad for these things...and the advice above is sound. Sorry to hijack earlier as i was not selling anything...just musing.

 

[Isotel]

I am going to be rebuilding them with different hub gears so it wont matter.

i think thats not the case, Search on pirates minitruck faq..

i dont know that the IFS will work, or maybe you need to run a bolt/fender washer instead of a c-clip if you do this!

Aisin Hubs are hard to come by these days.. Orange45 is a great seller!

$100 is the going rate!

 

[orangefj45]

i have a set of fctory bolts and fender washers to go with them. iirc, there is a difference in the splines or spline length.........