Wiring up the speakers. Help.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 14, 2006
Threads
47
Messages
529
Location
Sonoma, CA
Website
www.myspace.com
I wanted the aftermarket stereo with the iPod adapter that plugs into the iPod and you can changed songs, etc on the headunit.


So. I couldn't afford the wiring harness. :o


I was wondering if anyone had a guide to what each different color wire lead to each different color speaker.


I copied the wire guide from the12volt.com at first, and then went to my dad's house when he wasn't so I only had access to the tools in his shed. No internet.


I hooked everything up according to the site. Cept. There was no blue/yellow wire, no pink wire, no purple wire, no light green wire.

There were 3 different light greens, and each of them had different colored stripes.

I tried trial and error to get the sound to play out of the right speakers, and so far, I have the front right speaker playing crappy sound no matter what I have the balance/fade adjusted too.


I'd just like to know what wires to hook up to what wires. I'm sorry I post long drawn out topics.


So what's the + and - wires for the front speakers, and what's + and - for the rear speakers. I unhooked the wires from the sub and two small speakers in the cargo area, so if they need wires hooked up to them, I don't need it.



Thank you in advance.
 
Save up the $60 for the wiring harness and be done with it. Easy.


The wiring harnesses are only 12 dollars.


And I don't want to spend 12 dollars on something I can do with a dozen wire nuts.



And I already cut the harness off.




So I need to know what color wires correspond to what speaker.
 
Use those wire nuts and repair the harness you cut up and go and buy that 12 dollar harness, you have probably spent 3 hours on this situation, and at an hourly rate 4 dollars per hour (how much is your time worth?), the harnes would have paid for itself by now and you would be on your way to the next project. Saving 12 dollars has cost you at 2-3 hours of your time, and if someone gives you bad information on the color coding of those wires, you may fry your Ipod, radio or some other key electrical component in your cruiser.
 
X2

not flaming you, but buying a headunit when you don't have the money for wires doesn't make sense.

The space behind the headunit is scarce. Trying to wedge that many wirenuts back there is asking for more trouble.
 
X2

not flaming you, but buying a headunit when you don't have the money for wires doesn't make sense.

The space behind the headunit is scarce. Trying to wedge that many wirenuts back there is asking for more trouble.

It's a single din head unit, I've tested it for size, and there's plenty of room for the wire nuts and about 5 and a half feet of a 6 foot iPod cable.

I just need to know what wires connect to what speakers.


Because the power turns on. Nothing is fried. It's just the wiring schematics that I have found online aren't the correct colors and trial and error aren't working for me to get the speakers to play the right sounds.


And it's not like I'm spending 4 dollars each hour that I work on it. I worked on it for about an hour, and was able to unhook all of the electrical components to get the section of the dash off, get all of the power wires connected, and clean all of the dust and gunk off of most of the open section of everything. Now I just need another 15 minutes to screw wirenuts onto the new head units wires and the existing speaker wires and I'll have it done.



And what's the big deal about not using the factory harness? I've done it on 2 other cars that have turned out just fine.
 
you can take off the door panels and see what color the speaker wires are

Then I'd have to unscrew the speakers. And I think the colors of the wires that I'm dealing with aren't the same as the ones in that are actually connected to the speakers.


Unless anyone knows if the wires attached to the speakers are the same as the ones that are connected to the headunit.


If they are, and anyone can verify this, that will be as much information as I need.
 
Then I'd have to unscrew the speakers. And I think the colors of the wires that I'm dealing with aren't the same as the ones in that are actually connected to the speakers.


Unless anyone knows if the wires attached to the speakers are the same as the ones that are connected to the headunit.


If they are, and anyone can verify this, that will be as much information as I need.

Or am I going to have to bypass the amplifier anyways?

[in whiney voice] "then I'd have to unscrew the speakers, waaa":flipoff2:

My wires were the same.

I'd bet that $12 plug n play kit is looking pretty good 'bout now.

If you unit is aftermarket, ditch the amp.

:beer:- 2years
 
You are using wire nuts in a vehicle designed for off-road use? :eek: Blasphemy.

-B-
 
You are using wire nuts in a vehicle designed for off-road use? :eek: Blasphemy.

-B-

For the stereo. I don't think it's going to harm anything. Unless somehow a rock decides to try to rip out my CD player or something.


Is it going to? Honestly?


I could see a problem using wirenuts in something where flex could cause the wires to fall out of them, but on a CD player, I don't really see that as an issue.
 
[in whiney voice] "then I'd have to unscrew the speakers, waaa":flipoff2:

My wires were the same.

I'd bet that $12 plug n play kit is looking pretty good 'bout now.

If you unit is aftermarket, ditch the amp.

:beer:- 2years

K so I unscrewed the speakers, and the color of the wires attached to them were not the same colors as the wires that are what is going to be attached to the new headunit's wires.


And how do I get rid of the amp when for one, people keep telling me to buy a damn wiring harness and 2, it's located about 3 feet away from the headunit, and the wires there would also have to but cut and spliced.....



Is there no one on this board who can help me?




And I don't need another person to tell me to buy a wiring harness, because at this point, that is impossible because the factory harness and the wires the once harned are no longer the same being, and 2, I've done it before without a harness and 3. I don't have a 3. Actually 3 would be a lack of money.



It would be a lot more convenient to have the harness, but I didn't want to spend 12 dollars on something I had time to fiddle with anyways and I don't have 12 dollars. I need to save all the money that I have so I can afford gas to go to Surf N Turf. Plus I've been sick so I haven't worked a lot in the past week.



So if ANYONE can help me by telling me what wires I have to connect to what speaker, I would very much appreciate it.




And yes, I do know that it would be easier to do with a wiring harness. 7 people already recommended it. I'm not being an a******. I'm just letting people know that I was already told to use a wiring harness.
 
If you put wire nuts in your car you are just asking for problems. They are not designed for the environment of a car. IMO if you are to cheap to spend 12 bucks on a harness but would rather spend hours figuring out the wires you should rethink things a bit. Spend the 12 bucks and get it done. It will take you like 10 minutes to do with the harness. Or at least spend the 10 bucks for a soldering iron and make your connections properly.
 
If you put wire nuts in your car you are just asking for problems. They are not designed for the environment of a car. IMO if you are to cheap to spend 12 bucks on a harness but would rather spend hours figuring out the wires you should rethink things a bit. Spend the 12 bucks and get it done. It will take you like 10 minutes to do with the harness. Or at least spend the 10 bucks for a soldering iron and make your connections properly.

I don't see why using wirenuts is a big deal in an environment like behind a CD player. They may bump around a lot, but when they're secured properly, they're pretty much impossible to pull out without untwisting them a bunch. I haven't had a problem using wirenuts for CD players yet.

And it's not being cheap. It's called not having money. And it's hard to save up money buying food, clothes, gas, etc for a car when you don't have parents who'll buy you things like that. Or a job that doesn't pay over minimum wage that works you 40 hours a week.

I just used my money to buy what I could, since the CD player that was in the Cruiser was toast.
 
I haven't had a problem using wirenuts for CD players yet.

Since there are very few that have decided to string their own wire instead of buying a $12 wiring harness, it is not likely that those 1 or 2 'Mud members are going to see this thread in time to assist you.

Have you searched? I'm not being a search nazi but I do recall someone in the past 3 or 4 years that hacked the radio wiring harness and documented what they found. I know there is a thread somewhere here in the 80-Section that may have your answer. It is possible (though I cannot recall for certain) that T Y L E R contributed to the thread.... that is my recollection. For a clue, the thing that I remember was the poster was having problems getting the hacked wiring to control the radio antenna. That clue could help with advanced search terms.

Good luck.

-B-
 
See if this helps.

-B-
RadioWiring1.webp
 
Last edited:
Wire nuts? In a car? Honestly, learn from the folks around here who oh, maybe a couple more years experience than you do. Wire nuts are designed for wires that don't move...like a house. They are also designed for solid wire, not stranded wire that is found in your ride. Skip lunch this week, then, buy either a soldering iron, or at least a crimper and butt connectors...yeah, it's that important!
 
Back
Top Bottom