wiring question......

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 8, 2009
Threads
179
Messages
1,784
Location
Western Carolina
Ok, so I have now pulled and replaced a 1FZ, but it is not done.... oh no it always comes down to small details. Ok so here is my problem. We got a wire going to the starter that is not the starter wire, I found the starter wire and it went on, the one with the grey end thingy. The other wire looks to be some kind of ground, but it comes off the harness where the starter is, which is why my friend thought it was the starter wire. Second is the main ground for the engine which is not a huge problem, but it is just hard to get to when you have been doing the hard work we have. Lastly there is a fitting that looks like a hose, or something goes to, but there is no hose to go to it. It is on the bottom driver side, looks like it could be an oil cooler line as it is metal with what would be a flex line that goes to it. Anyways these are the things hanging us up from getting it started, which would be great. Any help would be appreciated.
 
>We got a wire going to the starter that is not the starter wire, I found the starter wire and it went on, the one with the grey end thingy. The other wire looks to be some kind of ground, but it comes off the harness where the starter is, which is why my friend thought it was the starter wire.

It is probably the wire from the ignition switch - no grounds connect to it as it is attached to ground.

>Second is the main ground for the engine which is not a huge problem, but it is just hard to get to when you have been doing the hard work we have.

That one can be a PITA. I got the bolt in by hand by removing the oil filter and moving the power steering reservoir out of the way. I tightened it with one of those universal ratchet attachments.

>Lastly there is a fitting that looks like a hose, or something goes to, but there is no hose to go to it. It is on the bottom driver side, looks like it could be an oil cooler line as it is metal with what would be a flex line that goes to it.

Got pics?
 
Back
Top Bottom