Wiper motor ?s

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

trw

Joined
Oct 28, 2003
Threads
25
Messages
141
Location
bham, al
My windshield wipers on my 70' FJ40 only work on high, and only on the days its not raining and you look at them just right. The original wiper motor corroded really bad and only has wires hinging off the front which aren't connected to anything. The motor on there now was pulled from a junkyard 40 and is in a mess itself. I've taken the linkage and such apart and lubed it well and that part works fine.

What I'm wondering is can this be reworked such that it will have an intermittant along with both slow and fast? Has anyone been succesfull with a franken wiper mixing the old linkage with a newer motor from a donor vehicle?

I don't mind sticking my head out so much, but the wife is starting to fuss about it. Any suggestions would be appreciated.

tom
 
Hasn't anyone fixed these old wipers before? There must be a way to get them current.
 
You want em fixed? Or do you want to mod them?
 
IDave said:
You want em fixed? Or do you want to mod them?
Either would be fine for me. I've looked for rebuild parts/kits but have not found anything yet.

tom
 
I think the intermittent thig is a chip or something that goes between the wiper switch and the motor. Don't see why you couldn't cabbage one from most anything. Unlike everything else that has two speeds and runs low through a resistor, I think the wiper motor must have two sets of windings in it.
I think CCOT sells just the motor, thought.

Ed
 
Have you called any local motor shops?
Most will re-build almost any kind of motor.

The intermittant feature is a simple circuit you can build yourself or buy ready made depending on your talents.
 
rusty_tlc said:
Have you called any local motor shops?
Most will re-build almost any kind of motor.

The intermittant feature is a simple circuit you can build yourself or buy ready made depending on your talents.

Thanks for the replies
Do you have a link or something to show how to do this? I've rebuilt plenty of electric motors, but not wipers. I'd be more than willing to build the int circuit if I had a diagram.
thanks for the info
tom
 
Back
Top Bottom