Window stuck

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 15, 2004
Threads
336
Messages
2,730
Location
Los Angeles, CA
Website
www.phipsi.net
Front DS window will go down but hesitates to come up and today just refused to come up at all. All of the other windows work fine. My guess is that the contacts on the switch need to be cleaned (never have been)?

Your thoughts and opinions are welcome, just thought I'd run it by since it's late and there wont be any wrenching tonight.

Thanks in advance, happy friday:beer:
 
Front DS window will go down but hesitates to come up and today just refused to come up at all. All of the other windows work fine. My guess is that the contacts on the switch need to be cleaned (never have been)?

Your thoughts and opinions are welcome, just thought I'd run it by since it's late and there wont be any wrenching tonight.

Thanks in advance, happy friday:beer:

What do you mean by "hesitates"? Is the motor bogging down, or...?

It's common for the channels to become stiff and brittle to where the motor can't force the window back up. You need to figure out whether that's what's going on or whether the motor's not getting power.

What's the dash voltage gauge doing during this?

Curtis
 
What do you mean by "hesitates"? Is the motor bogging down, or...?

It's common for the channels to become stiff and brittle to where the motor can't force the window back up. You need to figure out whether that's what's going on or whether the motor's not getting power.

What's the dash voltage gauge doing during this?

Curtis

Hesitates as in, I will click the lever up and nothing will happen for a second or two then the window will go up. The window goes down just fine and all of the other windows work without any hitch.

The motor does not seem to be bogging down and it clearly works b/c the window goes down.

I dont' know about the channels being stiff and brittle. Voltage is steady at about 14.0 and it doesn't make any difference if it is higher.

Thanks for the help
 
Mine used to do that. I removed the switch and cleaned the crud off the contacts and it works fine. It still is a little slow, but I think that is due to the weather strip and worn components.
 
Both my passenger front and driver window struggles to go up only when it is raining. Goes down fine. Perfect when it is dry. Sounds like what CJF said could be my problem (stiff channels). Is it a take apart and clean thing, or do you think I need new parts? Thanks.
 
Both my passenger front and driver window struggles to go up only when it is raining. Goes down fine. Perfect when it is dry. Sounds like what CJF said could be my problem (stiff channels). Is it a take apart and clean thing, or do you think I need new parts? Thanks.

I took mine apart and cleaned them, then regreased the channels. It's better than before but still not perfect. IMO if I were going to take the doors apart again I would replace the channels. That's part of the plan when I add sound dampening to the doors.
 
My 80 had similar problems, It would go down, but sometimes wouldn't go up.
I discovered that by pushing the glass down while activating the switch it would start working.
The motors have gears that when they wear out , don't let the motors work for some reason. Maybe they have a position sensor, thats screwed up, Who knows???
Still use it like that. Haven't found a cure though.

Good luck
 
Back
Top Bottom