window removal

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 23, 2004
Threads
17
Messages
131
Location
Williamsport, PA
Is it possible to remove the hard top windows and also save the weather stripping?
 
Anything is possible....The likelihood of it being done successfully however is in direct relation to the flexibility left in the weather strip and its temperature. I have seen people do it, but I have not ever been able to.
 
LOL I was waiting for you to chime in.... Thanks
the strips seem very pliable, But like you said I have yet to salvage one. Was just wondering if anyone has a secret to this.
 
I saved all of mine from my 77. Made sure the weather stripping was warm. Since I am in Iowa I used a portable heater in the garage and then lubed up the seal with soapy water to help things along. I also used nylon tire bars from the bike shop. They are only about 5 inches long and helped to not scratch up the paint. Hope this helped.
 
Yes

I removed all window rubbers from my 79 hardtop and windshield. Just spray liberally with silicon and press like he!! from the inside. Start at one corner. If you can get your finger under the inside gasket you can run it around the inside and this will help break it free. To reinstall. Spray liberally with silicon. The rubber and the frame. Use a (medium thickness) piece of rope and put it in the rubber which should be already placed on the glass. Put the rope where the metal frame should go. Wrap rope all the way around and put the ends inside the truck. Start one corner of the glass with your hands and then have someone apply pressure to the outside and pull the rope from the inside. Pull one end at a time and go slow as not to cut the rubber.
 
Back
Top Bottom