Winch Mount on a dime

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 30, 2006
Threads
4
Messages
68
Location
Charlotte, NC
So, I’m married and renovating a hundred year old house. Needless to say, I’m broke - pretty well all the time. I’d really like to have a killer bumper, but the finances aren’t there. I assessed my situation and realized that I’m going to get stuck before too long and that a fancy bumper will do me little good in that situation where as a winch might actually help get me out. Since I plan on getting stuck somewhere in the near future I bought a winch. A Summit Racing 12,500lb winch – and it rocks. Summit has great customer service, same day shipping, great prices and a quality product (it’s actually a T-Max at a couple hundred cheaper) – oh yeah No I don’t work for Summit. I just appreciate good service. Anyway I got the winch two days after I ordered it; I then had to figure out how to mount it (remember: without the cool ARB, Hanna, etc.). So here’s what I came up with. I was trying to hide my winch under my stock bumper. LXTreme posted a picture that he called Mongolian OEM Winch and that’s what I was hoping this would wind up looking like – a completely hidden winch. Here’s how that turned out.

All totaled, I have about $28.50 in hardware, wire and spray paint in it and about 10 hours of labor/beer drinking/talking it out. I utilized the weldnuts that were already present in the frame and made sure that its all reversible – everything that is except the bumper, but that’s going away in the near future.

I started with a piece of 6”x6”x0.25” angle iron that I found behind our building at work. That seemed stout enough for a winch so I started cutting and welding and came up with this – the basic frame:
 
Last edited:
I put a few “beefers” underneath just incase this thing has the tendency to deform – they’re 1”x1” angle iron from Lowes.
 
Last edited:
Close up of the TIG welds – welding this thickness material is a blast with the TIG. It’s almost easy.
 
Last edited:
Here’s how the winch fits in there. This is just a mock up to check out the placement.
 
Last edited:
Everything looked pretty good on the mock up so I drilled some holes and mounted it up on the truck. I used some extra 6x6 angle iron to capture the frame rail to prevent twisting. Here’s how that happened:
 
Last edited:
I only had one issue with the fitment: Nothing the angle grinder couldn’t solve.
 
Last edited:
Pretty slick with the help of two 2 gauge battery cables that were long enough for the remote solenoid set-up:
 
Last edited:
very cool. I like it. Gonna do something like that soon if I cant find the $$$$ for a bumper
 
This set up was a buddy of mine’s idea and wound up working really well. It’s a plate of Aluminum that is captured under the battery hold down and screwed to the bottom of the battery box.

So, here’s the final product – remember for about 30 bucks:
 
Last edited:
awesome work! If you use a hawse fairlead, it would basically be flush with the bumper - you could mount a license plate to cover the winch.

can you reach the clutch lever from the slots in the bumper?
 
Back
Top Bottom