will this work for a snorkle

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 31, 2005
Threads
28
Messages
129
Location
puyallup wa
i want to hook up my homemade snorkle and airbox to my weber (F motor) but i dont want to pay 140.00 for the weber snorkle fitting. i was thinking about buying THIS fitting thats ment to mate the stock air box to webber for 40.00. i am just woundering if it has enough lip on the top to hook up an air hose to it so i can connect my box.im not sure how the originals hooks up so i am asking anyone who knows. i cant tell by the pic if it has a large lip or not. thanks!!
 
I have one of those on my Weber setting on the shelf. Factory F box WILL NOT HOOK UP AS IS! There is not enough lip. What I ended up doing, was to cut a piece of Aluminum pipe that is larger than the factory hook up and also fits inside the lip on the Weber adapter. I then welded a brace inside the pipe so I could put all-thread co I could seal the factory box to the Weber.

Anyway it was such a pain in the A@@ that I went back to the factory carb.

Chuck
 
im not looking at hooking up the factory air box, but one i pulled from a mini van. does anyone have any other ideas of what i could use besides the $140 weber snorkle fitting...
Hey Yotahilux how about a pic of that welded up fitting on your webber, this sounds like somthing that may work for what i need. why did you have problems with it???
 
Airtube is off of an efi pickup.

I HAD to do this, as my new master/booster set up hit the weber air cleaner.

I chose not to run a full snorkle because of the tight trails around here.
 
Back
Top Bottom