White smoke post egr modulator replacement

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 19, 2013
Threads
38
Messages
562
Location
Eastvale, CA 92880
I've been getting the P0401 intermittently on my 97. To try and solve the problem. I replaced the egr modulator to see if the cel will go away. After driving 30 miles on the freeway, i noticed white smoke coming out of the exhaust after being stopped on the exit light for a minute or so. This reminds me of my head gasket issue in the past and/or the clogged valve on top of the valve cover (forgot what its called). Anyone had this issue before? Any input appreciated. Thanks.
 
Forgot to mention. After the incident i parked it and tried to replicate what happened but i couldnt. Checked all fluids and found my oil on the low side and topped it off. Brought the cruiser to work to see if it will do it again but hasnt yet. Still wondering why it did that. Could accidentally switching the two vacuum hoses do it?
 
Maybe the new EGR and flow freed up some carbon buildup in the upper intake? I replaced all my EGR components and vacuum hoses and got the 0401 a few months later. Ended up taking the upper intake off and cleaned the ports. Also, installed a catch can for the PCV which seems to be doing a good job of keeping blowby oil from traveling back to the intake.
 
Could it have been condensation and not white smoke. In the right weather that can be very thick
 
Maybe the new EGR and flow freed up some carbon buildup in the upper intake? I replaced all my EGR components and vacuum hoses and got the 0401 a few months later. Ended up taking the upper intake off and cleaned the ports. Also, installed a catch can for the PCV which seems to be doing a good job of keeping blowby oil from traveling back to the intake.
But wouldnt carbon build up be black smoke. I thought about this too. Another coincidence is my oil dipstick level dropped to the very tip L. However, I havent checked my level for a good 3 weeks. Last time i checked it, it was full.

Thats the valve I was looking the right word for, PCV. I had trouble with that in the past causing white smoke. It is relatively new though. About 40k miles. I guess it wont hurt to change it again.
 
Could it have been condensation and not white smoke. In the right weather that can be very thick
True, however it was sunny that day. And the coincidence that my oil level suddenly dropped to Low. Again, I havent checked my oil level for a good 3 weeks as it has been consistent the past couple of checks.
 
Any input on switching the P and R lines by mistake? If this indeed can cause the problem. Im about 99% sure I plugged it right but I could be wrong and I cant tell which is which anymore.
 
Any resolution? I have a similar problem with periodic P0401 codes and smoking after sitting at idle for a few minutes. Unfortunately, my issue was found by the smog guy! His machine detected the smoke buildup and required a "snap test", where you let the engine idle then quickly rev to 3000-3500 RPM. Poof! Small cloud of smoke. Ugh.
 
Back
Top Bottom