White plugs + code 401

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 18, 2008
Threads
20
Messages
62
Location
STL> MISSOURI
I have read many threads on the dreaded 401. My
question is, Are these plugs the problem? see pic.
What could be causing the plugs to burn like this?
Should I try to figure out what the problem is with plugs
before I worry about the 401.
1997 LC 156,000 miles.
Thanx in advance
George:mad:
bad plug.webp
 
I'm no engine expert, but I would say white plugs would be the result of another problem, not the cause. How old are the plugs, how long have you had the 401? Any other codes?
 
I just got the code, say 1000 miles ago. I do not know the age of the plugs. I bought the truck 3000 miles ago. I will replace the plugs for sure! But do you think the O2 sensor could cause the issue with the plugs and the EGR (401) or both. I feel I need to
address the plugs first, not just replacing them, but figureing out
what the deal is.
 
i believe you get a different code with 02 sensors. p0401 is just egr system if im not mistaken!
 
I cannot see how plugs or any problem that shows on the plugs could generate a p0401.

you say the plugs are white, is there any grey or tan tone at all in that ash on the plugs? if so that is normal, or are they very clean? as in steam cleaned?
 
Yes, I just got off this killer web site for spark plugs.
Spark Plugs

I think my plugs are perfect, I guess everything else I have owned fouled plugs. I will run the tests from the several
threads I have found and go from there as opposed to throwing
new a EGR valve or O2 sensor. I have only owned the truck for a
short time, so with 156,000. I have to think it needs O2 sensors.
 
Back
Top Bottom