whistling noise

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 11, 2005
Threads
159
Messages
1,910
Location
Sunny South
i have a crazy whistling whining noise comming from near my brake booster and carb, i tried checking if there was any vacuum leaks with carb cleaner, maybe i just don't want it to be the brake booster because its an expensive fix, but what other things could it be comming from? carb?

it gets louder as the rpm's go up as well, i made my girlfriend leave just to make sure the whining wasn't her, no luck.....

i have a weber carb and headers and its desmogged to, any if is appreciated
 
SOR has a page on this. They describe the test you can do. Yes there are rebuild kits, but it's not that easy (you have to build a spring compressor). Do a search, and you'll find more, and where to buy a rebuilt booster.

http://www.sor.com/sor/cat014b.tam?xax=20276
 
or upgrade to a 60 or 80 booster, think one of them will work if you do something to it, then if you ever go with disc brakes, youll be set. least thats my plan of sorts
 
7/70 - 9/75 When pressing on the brake pedal a hissing sound, a rapid change in idle or a rough idle are signs of a brake booster malfunction. well its hissing all the time so i don't think its the brake booster, not just when a press the brake
 
Get a piece of 1-2 inch PVC, stick one end in your ear, then do a scan and see if you can isolate it.
 
since you have a webber i'm willing to bet at least some of your noise is coming from between the adapter plates. The screws that hold the carb to the top adapter are 2 threads too long. This will give you a vacuum leak. The fix, take those treads off and reseal everything. This issue has partly given webbers on cruiers a bad name.

Oh and a new brake booster will run you $15 at a pull-n-save. Any toyota 4 bolt to master will work.
 
bustanutley said:
since you have a webber i'm willing to bet at least some of your noise is coming from between the adapter plates. The screws that hold the carb to the top adapter are 2 threads too long. This will give you a vacuum leak. The fix, take those treads off and reseal everything. This issue has partly given webbers on cruiers a bad name.

...
This was my first thought. The adaptor plate screws that hold the plate to the manifold can also loosen over time.
 
sweet... yea i'm pretty sure its the weber.. as i put pressure on it ( like pushing down with my hands), the noise changes. i'm going to pull it all apart and reseal everything with some good RTV, thanks guys and i know webers aren't good with f engines but its what i bought it with...


thanks for the replys
 
bandy rooster said:
sweet... yea i'm pretty sure its the weber.. as i put pressure on it ( like pushing down with my hands), the noise changes. i'm going to pull it all apart and reseal everything with some good RTV, thanks guys and i know webers aren't good with f engines but its what i bought it with...


thanks for the replys
I've had a Webber on my rig for ten years and have no complaints.
 
bandy rooster said:
sweet... yea i'm pretty sure its the weber.. as i put pressure on it ( like pushing down with my hands), the noise changes. i'm going to pull it all apart and reseal everything with some good RTV, thanks guys and i know webers aren't good with f engines but its what i bought it with...


thanks for the replys


Just use new gaskets, no form of RTV will hold up to gas
 
hey, guess what while taking off the plate with the smaller screws i hit it vigirously (sp) and one bolt when flying into a bush...i was so PO i looked for ever, now i have to go to fastenal or something to get another damn bolt, i swear i try not to screw up but its inevitable..... the whistling noise is for sure the carb though, even though rusty had "no complaints"

thanks...if you can give me a heads up on where to find the missing smaller size bolt (allenhead) i will be sooooo thankful
 
bandy rooster said:
hey, guess what while taking off the plate with the smaller screws i hit it vigirously (sp) and one bolt when flying into a bush...i was so PO i looked for ever, now i have to go to fastenal or something to get another damn bolt, i swear i try not to screw up but its inevitable..... the whistling noise is for sure the carb though, even though rusty had "no complaints"

thanks...if you can give me a heads up on where to find the missing smaller size bolt (allenhead) i will be sooooo thankful

I never hit my adaptor plate "vigorously". :D Any time you start using adaptor plates it will take on some aspect of a cluster f.


If a lost bolt is the worst you do you can take a break and have a beer, be prepared to spend a lot of time with an easy out and drill if you are going to work on Cruisers. And pick up a couple of cans of Liquid Wrench when you go shopping for the missing bolt. The day before I work on something I hose it down with LW.



BTW listen to bustanutley, I never thought about the why of it but I've never seen rtv or any other gasket compound used on intake stuff.
 
alright, no rtv, i wasn't taking it off, i was putting it on and had the plate sittin on the valve cover, got the allen wrench stuck in the bolt ripped it out and back handed my adapter plate onto the ground....completly my fault....i'll just pick up some gasket material at NAPA tomorrow and do it the right way, and there isn't any fuel safe type silicone out there?

i was working in the dark and i don't have a garage i have a backyard/alley to work on....not the greatest but whattyado
 
Back
Top Bottom