When to Adjust Valves

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 29, 2005
Threads
14
Messages
44
Location
N: 06° 47.85' | E: 079° 53.38' | Colombo, Sril
Website
mithila.gfoto.com
Hi All,

My first post to the forum!.

How do I decide whether and when I need to do a valave adjustment on my B diesel?

Some history & Facts: I got it second hand. do not know the mileage. Put it in truck about an year back. Put a new head gasket & Adjusted the valves at that point. Had done about 9000KM since then.

Fuel mileage around 12 KM per Liter high way around 10.5 city.
No smoke what so ever when warmed up. (slight smoke when cold)
If you heat it for around 30 - 45 secs.(outside temp 29C) starts on 3rd or 4th cycle.
Stock gauge takes about 5 seconds to reach the stable oil pressure at startup. Needs about 1/2 liter of oil(15W-40) for 3000KMs to keep the level at full mark on the dip-stick


Why I'm thinking of valves

(1) I feel that it is not as smooth as my friend's B diesel
(2) I feel that it is bit noisier than my frind's B diesel
(3) I like it to start at the first cycle(or 1/2 cycle) as my friend's B does.
 
You should probably retorque the head and adjust the valves now as both are interdependent and will change within a few heatup/cooldown cycles after changing a head gasket. At 9000 km I'd think that this procedure is overdue.
Depending on how much change has occured since you replaced the head gasket you might well find that those adjustments result in a lowering of the noise.

If yours is an inline injection pump and your friend's is a rotary his will be quieter than yours, and nothing can be done about that. A general assumption.

Are you giving any throttle while attempting to start? It may help to depress the pedal about 1/4 of it's travel. You shouldn't need to go through 3 or 4 glowplug cycles. Do you have a glowplug indicator installed? Those can help determine the temperature of the plugs/combustion chamber and hence the engine's willingness to fire. Depending on ambient temperature, simply waiting a set period of time may not be an accurate determiner of readiness to run.
 
Back
Top Bottom