I have a set of four 17 inch wheels that I would like to get powder coated. Does anyone know of a shop where I can get this done and how much I should expect for this to cost? Thanks in advance.
Wheels powdercoating
- Thread starter Highway Romping
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Probably not your neighborhood, but I had them done for $75 ea/300 for 4 in Flagstaff.
Reach out to Esper, he used a place in Mesa, I think.
His wheels look amazing, although it took a while to get them back.
His wheels look amazing, although it took a while to get them back.
Southwest Sandblasting and Paint close by on Germann/Az Ave. Very reasonable. I had a tube bumper pc for $85. Coworker here had his set of wheels custom color pc for reasonable, I believe $350 for his set which included having to order his custom powder color.
- Thread starter
- #5
Thank you for all of the information, I'll look into the places mentioned above.
These guys have done some work for me on several occasions, mostly stripping coatings off. They also do ceramic and powder coatings. Every time I go there they are very busy so I suspect they have a large clientele. All my projects (front bumper and other small pieces of metal) were turned in 1 day. They are up in Mesa.
Did mine in mesa was about 400 for wheels and the bead locks... http://www.azprostrip.com/ Did mine and a good job
- Thread starter
- #8
@jkl72-40 Thank you for the recommendation.