Wheel Question ?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 14, 2006
Threads
123
Messages
1,108
Location
Central Cali
HOWDY ALL, HAD A DEAL COME MY WAY OVER THE WEEKEND, AT LEAST IT MIGHT BE, THE GUY HAS 5 CENTERLINE WHEELS, AND 5 - 35X12.5 TIRES WITH ABOUT HALF TREAD LEFT ON THEM. WANTS $500 FOR ALL 5. THE QUESTION IS, I HAVE STEEL WHEELS NOW (only 4) AND ALSO NO LIFT ON MY FJ,
WHAT IS PREFERED FOR WHEELIN, STEEL OR ALUMINUM ? AND ALSO WILL THE 35'S WORK IF I DO THE ADD A LEAF THING ? I ALREADY HAVE THE ADD A LEAFS. I AM WANTING TO DO 35'S HOWEVER NOT SURE IF THIS IS A GOOD DEAL OR I WILL NEED THE LIFT KIT FIRST ?

ANY INFO ?

CHEERS .... :grinpimp:
 
Yeah for 35's you'll probably need a 4'' lift. Aluminum is lighter, some like that better (less unsprung weight), but steel you may be able to beat back into shape if you bend it, alum will break. I run a 2 1/2" lift and 33's and I can make them rub front and rear when wheeling.
 
Unless you want to cut the hell out of your rig, you are going to need a 4 inch lift to run 35's, most guys go with the 1.5 inch shackles as well as the lift. But you can get 2.5 inch or even 3 inch shackles to get even more lift if so desired.

Also make sure the backspacing on the wheels are correct, 3.5 inch bs is standard for 40's any more and you will run into problems with the wheel hitting the caliper, you can use spacers to correct it but some do not like them, or you can shave a 10th off of the caliper with no problems.
 
Back
Top Bottom